amazon ASRock H110M-HDV reviews
A product that wants to succeed must have an emphasis. The highlight that the ASRock is equipped with for the H110M-HDV is the durable Super Alloy standard – previously only available on mid-range and high-end motherboards.
Included accessories are basic but complete, including manuals, drivers, mains and two 6 Gb / s SATA3 cables.
H110M-HDV is the usual Micro ATX size of the low price segment. Overall, the motherboard is pretty nice with black glossy that adds little orange from the heat sink.
One of the strengths of the H110M-HDV is that it is equipped with Super Alloy components, which are made of anti-moisture and oxidation glass fibers, which can withstand the hot, humid and dusty climate.
Normally, low-cost circuit boards are slightly curved right from the opening of the box due to lack of thickness as well as hardness. H110M-HDV not so: Board circuit straight, thick and hard, hard to bend.
One of the most important factors to assess CPU supportability is the number of power phases of the motherboard. The H110M-HDV has up to five power phases, including three phase-equipped mosfet radiators. ASRock seems to be the only company that has the mosfet radiator.
Each phase is controlled by three low impedance mosfets instead of two conventional mosfets. The operating temperature of the mosfet therefore drops significantly.
On the 14nm line, Skylake CPUs consume very little power, and even Core i5 and Core i7 have only 65W (non-K non-overclocking). So even with a 4 pin battery, the H110M-HDV still has the power to power these high-end processors.
Like the H81 of the previous generation, the H110 is only Intel equipped with two RAM slots. However, at this time, RAM manufacturers have begun to release memory sticks up to 16 GB, so the maximum capacity that H110M-HDV support up to 32 GB.
For the H110, Intel upgraded the PCIe x16 slot to 3.0, doubling the 2.0 specification on the H81, ready to support today’s most powerful graphics cards, including the GTX 980 Ti or Titan X.
In addition to the mosfet radiator, ASRock is also the only company in Vietnam that has SATA ports swiveling on the H110 mainboard, increasing the neatness inside the chassis, removing the SATA cable much easier. All four ports are SATA3 6 Gb / s, not the fray when playing SSD anymore.
At the bottom corner there are still 2 waiting areas for two SATA3 ports, indicating that the H110M-HDV uses the same boards and components with a higher B150 product.
Chipset do not use a lot of copper, but “trimming” is reasonable so the area exposed to air is very large, the heat dissipation efficiency increased.
where can you get a ASRock H110M-HDV online
ASRock Motherboard Micro ATX DDR4 H110M-HDV: Buy it now
ASROCK ASRock H110M-HDV R3.0 LGA1151 Intel H110 DDR4 SATA3&USB3.0 A&GbE MicroATX Motherboard / H110M-HDV R3.0 /: Buy it now
Bundle: ASRock H110M-HDV + Core i5 6400 (4 x GHz) + 16GB DDR4 2133MHz Memory: Buy it now
Bundle: ASRock H110M-HDV + Core i5 6400 (4 x GHz) + 8GB DDR4 2133MHz Memory: Buy it now
Bundle: ASRock H110M-HDV + Core i5 6400 (4 x GHz) + 4GB DDR4 2133MHz Memory: Buy it now
Although the lowest priced product of the current lineup, the H110M-HDV is still equipped with ALC 887 audio chip, supporting Gaming sound and Cinema 7.1. Support for the ALC 887 is dedicated ELNA audio capacitors.
Jumper Audio for the chassis is located on the PCIe x16 slot – a rather nasty place. If you pay attention to this point from the beginning, you can cable audio underneath the motherboard, which is tougher than the usual mainline bottom.
The rear port interface is handy with full PS / 2 ports, USB 2.0, USB 3.0 ports and 3 HDMI, DVI and Dsub output ports – supporting 99% of devices and monitors. For integrated graphics, the H110 supports simultaneous export of two monitors.
Conclude
Although called H81 replacement in the universal segment, but in terms of features like the H110-like B85 miniature motherboard size, ASRock H110M-HDV is such a representative.
Equipped with up to 5 power phases, each phase has 3 low-impedance mosfets, which support Core i5 and Core i7 processors (non-K, 65W). There are no additional requirements: 4 USB 3.0 ports, 4 SATA3 ports, the most powerful graphics support, up to 32 GB of RAM. Component quality is not a complaint. The board is made of strong fiberglass, moisture-proof and oxidant resistant enough to withstand the hot and humid climate and dust.