ASUS GL753VE Battery Replacement

The ASUS GL753VE is a robust gaming laptop designed to handle intensive tasks and deliver high performance for gaming enthusiasts and professionals alike. However, like any electronic device, its battery is subject to wear and tear over time. A battery replacement can become necessary to restore optimal performance and extend the lifespan of the laptop. This comprehensive review will delve into the process, considerations, and tips for replacing the battery in the ASUS GL753VE, covering everything from symptoms of battery issues to the replacement procedure and recommended practices.

1. Understanding the Battery in ASUS GL753VE

1.1. Battery Specifications

The ASUS GL753VE typically comes with a lithium-ion battery, which is common in laptops due to its high energy density and longevity. The battery specifications for this model usually include:

• Type: Lithium-ion (Li-ion)
• Capacity: 6-cell, 48Wh to 72Wh (depending on the configuration)
• Voltage: 14.8V to 15.4V
• Typical Lifespan: 1 to 3 years, depending on usage and care

1.2. Common Battery Issues

As the battery ages, you may encounter several issues, such as:

• Short Battery Life: Reduced runtime between charges.
• Slow Charging: Longer charging times or failure to charge fully.
• Overheating: The battery may get unusually hot during use or charging.
• Swollen Battery: Physical swelling of the battery, which can be hazardous.
• Frequent Shutdowns: The laptop may shut down unexpectedly due to insufficient power.

Understanding these symptoms is crucial for diagnosing whether a battery replacement is needed.

2. Preparing for Battery Replacement

2.1. Gathering Tools and Materials

Before starting the replacement process, ensure you have the following tools and materials:

• Replacement Battery: Purchase a genuine or high-quality third-party battery compatible with the ASUS GL753VE.
• Screwdrivers: Typically, a Phillips head screwdriver is required for laptop disassembly.
• Plastic Pry Tools: To safely open the laptop without damaging the casing.
• Anti-static Wrist Strap: To prevent static electricity from damaging internal components.
• Soft Cloth or Mat: To place screws and parts on, keeping them organized.

2.2. Backup Data

Before replacing the battery, it is a good practice to back up your data. Although the battery replacement process is unlikely to affect your data, backing up ensures that your information is safe in case of unexpected issues.

2.3. Power Down and Disconnect

Ensure the laptop is completely powered down and unplugged from any power sources. Remove any external devices such as USB drives, external hard drives, and peripherals.

3. Step-by-Step Battery Replacement Process

3.1. Disassembling the Laptop

3.1.1. Remove the Back Panel

1. Turn Over the Laptop: Place the laptop on a soft surface with the back facing up.
2. Unscrew the Back Panel: Use the Phillips head screwdriver to remove the screws securing the back panel. Keep these screws in a safe place as they will be needed to reassemble the laptop.
3. Pry Open the Panel: Gently use plastic pry tools to lift the back panel. Be cautious not to damage the plastic clips holding the panel in place.

3.1.2. Locate the Battery

1. Identify the Battery: Once the back panel is removed, locate the battery. It is typically a rectangular component with a few wires connecting it to the motherboard.
2. Disconnect the Battery: Carefully disconnect the battery cable from the motherboard. This connection is usually a small plug that can be gently pulled out.

3.2. Removing the Old Battery

1. Unfasten the Battery: The battery is often secured with screws. Use the Phillips head screwdriver to remove these screws.
2. Remove the Battery: Carefully lift the battery out of its compartment. Handle it gently to avoid damaging surrounding components.

3.3. Installing the New Battery

1. Position the New Battery: Place the new battery into the compartment, aligning it with the screw holes.
2. Secure the Battery: Reinstall the screws to secure the battery in place.
3. Reconnect the Battery: Attach the battery cable to the motherboard, ensuring a secure connection.

3.4. Reassembling the Laptop

1. Replace the Back Panel: Align the back panel with the laptop and press it into place. Ensure that all clips are properly engaged.
2. Screw the Panel: Reinstall the screws to secure the back panel.
3. Reconnect Power: Plug the laptop back into its power source and power it on.

4. Post-Replacement Considerations

4.1. Battery Calibration

After installing the new battery, it’s advisable to calibrate it to ensure accurate battery level readings:

1. Charge to Full: Charge the battery to 100% and leave it connected for a few hours.
2. Discharge Fully: Use the laptop until the battery is fully discharged and the laptop shuts down.
3. Recharge Again: Recharge the battery to 100% to complete the calibration process.

4.2. Checking Battery Health

1. Monitor Performance: Check the battery performance by using the laptop normally and observing any improvements in battery life and charging times.
2. Run Diagnostics: Use built-in or third-party diagnostic tools to assess battery health and performance.

5. Tips for Extending Battery Life

5.1. Regular Maintenance

• Clean Vents: Ensure that the laptop’s cooling vents are free from dust and debris to prevent overheating, which can affect battery life.
• Update Software: Keep your operating system and drivers up to date to ensure optimal battery performance.

5.2. Optimal Usage Practices

• Adjust Brightness: Lowering the screen brightness can help extend battery life.
• Use Battery Saver Mode: Enable battery saver mode in your operating system to reduce power consumption.
• Manage Applications: Close unnecessary applications and processes to reduce battery drain.

5.3. Avoid Extreme Conditions

• Temperature: Avoid exposing the laptop to extreme temperatures, both hot and cold, as these can adversely affect battery performance and lifespan.
• Storage: If you’re not using the laptop for an extended period, store it in a cool, dry place with a battery charge of around 50%.

6. Troubleshooting Common Issues

6.1. Battery Not Charging

• Check Connections: Ensure that the battery is properly connected to the motherboard and that the power adapter is functioning correctly.
• Inspect the Adapter: Test the power adapter and cable for any signs of damage or malfunction.
• Update BIOS: Sometimes, updating the BIOS can resolve charging issues. Check the ASUS support website for any relevant updates.

6.2. Battery Draining Quickly

• Power Settings: Review and adjust power settings to optimize battery performance.
• Application Usage: Monitor and manage applications that may be consuming excessive power.

6.3. Battery Not Recognized

• Recheck Installation: Ensure that the battery is properly installed and connected.
• Reset CMOS: In some cases, resetting the CMOS (Complementary Metal-Oxide-Semiconductor) may resolve detection issues. Refer to the laptop’s manual for instructions on how to perform a CMOS reset.

7. Choosing the Right Replacement Battery

7.1. OEM vs. Third-Party Batteries

• OEM (Original Equipment Manufacturer): OEM batteries are manufactured by ASUS or authorized partners and are typically more reliable. They are designed specifically for your laptop model and come with a warranty.
• Third-Party Batteries: High-quality third-party batteries can be a cost-effective alternative, but it is essential to purchase from reputable sources. Check reviews and ensure compatibility with your ASUS GL753VE.

7.2. Factors to Consider

• Capacity: Choose a battery with similar or higher capacity compared to the original to ensure adequate power supply.
• Compatibility: Verify that the replacement battery is compatible with your specific ASUS GL753VE model.
• Warranty: Opt for batteries with a warranty to cover any potential defects or issues.

8. Conclusion

Replacing the battery in your ASUS GL753VE is a manageable task that can significantly enhance the performance and longevity of your laptop. By understanding the battery specifications, preparing adequately, and following the detailed replacement procedure, you can successfully carry out the replacement process. Regular maintenance, optimal usage practices, and proper care of the new battery will further ensure that your laptop continues to perform at its best.

Summary of Key Points:

• Battery Issues: Common problems include reduced battery life, slow charging, and overheating.
• Replacement Process: Involves disassembling the laptop, removing the old battery, installing the new one, and reassembling the laptop.
• Post-Replacement: Calibration and monitoring of battery health are crucial for optimal performance.
• Extending Battery Life: Regular maintenance, optimal usage practices, and avoiding extreme conditions can help prolong battery lifespan.
• Choosing a Battery: Opt for genuine or high-quality third-party batteries with appropriate capacity and compatibility.

By adhering to these guidelines and best practices, you can ensure a smooth battery replacement experience and enjoy the continued performance of your ASUS GL753VE.