amazon Audio Recorder 3.0 Plus reviews
For home users who need to digitize audio sources from cassette tapes, the Audio Recorder 3.0 Plus and USB cassette player are the best choices on the market today, due to their relatively simple, easy-to-use features. Does not require the user to understand a variety of complex techniques.
USB Cassette Player
Products are rare because of low popularity, can only be purchased abroad so the distributor’s import to diversify the product is a plus point for consumers. The exterior of the product resembles that of a 90s handheld cassette player with simple mechanical keys such as music playback, tape rewinding, reversing, stopping, etc. The machine features an innovative modern integrated lane The mini USB 2.0 port is powered by two power supply and a microphone that sends audio signals directly to the Audio Recorder 3.0 Plus software when installed on the computer.
The machine is quite rugged plastic shell, fragile, the details are not sharp, like the toys originated from China. In particular, the “hinges” of the cups are slightly flattened so they can break if there is a strong collision or frequent closure. Function keys slightly small, especially the DIR (fast reverse side of the tape when playing music) with no directional arrows so users will find it difficult to know the tape cassette playing music on the face to reversing.
The right side is the headphone jack, mini USB connector and volume control. The left side only has a power supply 3V adapter, the inside is also designed slot with 2 AA secondary battery. The terminals on the machine are designed slightly bent, showing the product quality is not high. When the TestLab tested the connection to the mini USB cable attached to the product, the sound was often noise, with a lot of noise although the noise filter was adjusted but not removed. So Testlab tried to change two other types of mini USB cable quality, the new noise is completely removed. Particularly with the RCA lotus audio cords attached to cassette players, other discs are of better quality and without noise.
In addition, according to the manual, manufacturers also note when using the AA battery inserted in the machine should be careful because there is no way to block the electronic circuit, so when using long need preventing battery leakage causes damage to the control circuit.
where can you get a Audio Recorder 3.0 Plus online
Audio Recorder 3.0 Plus with Cassette Player: Buy it now
Audio Recorder 3.0 Software
Honestech specializes in audio editing software since 1998, so the improved version of Audio Recorder 3.0 Plus will make converting audio from cassette tapes to MP3s extremely easy. Users only need to install the software, then plug in the tape to the device, turn on the music player, the sound will immediately follow the USB cable or RCA lotus cotton wire to the software. Then the user selects the recording function on the software to complete the digitization of the cassette and then save it to a computer or burn to a CD.
Note that this software is copyrighted, so only allow installation from 2-3 machines is the maximum, if the number of installs, the software automatically activates the function of tracking copyright code, can lock The code provided. The license code is pasted on the back of the installation diskette.
Initially install the software before plugging in the USB cassette player because the software needs to load drivers (drivers) to identify the audio transmission device. For other types of cassettes and discs, users will have the option of selecting the source of income as indicated by the clear and specific illustrations on the software.
The interface of the software at startup will show a guide with two methods used to convert audio is Easy Wizard Mode and Advanced Mode.
With the Easy Wizard Mode, it is operated step-by-step, so you just have to follow the steps illustrated by software such as input device, audio source, noise filter, And finally burn to CD … The entire process takes place in real time so the recording process will take 30 – 45 minutes for a cassette tape, storage depends on MP3 or Wave format. If you want to capture both sides of the tape, the USB cassette player has auto reverse function – automatically reverses the ice surface when it is finished.
Advanced Mode is for users who are knowledgeable about sound processing. Then the method of implementation will be divided into 3 steps: recording, sound processing and publishing. In the steps there will be many other options, such as recording that will allow you to change the quality of the audio format from Mono to Stereo or vice versa. The Noise Reduction audio processing also allows for the audio segment to be trimmed. There are also a lot of sound processing techniques that require the user to have the knowledge of Normalize, Fade in / out. The publishing section allows you to select the form to save on a computer to MP3 or burn it to a CD.
Conclude
In general, the Audio Recorder 3.0 Plus software and USB cassette player adapter is a worthwhile product for families or users wishing to convert cassettes. The interface uses good software, easy to use, lots of good audio processing features, storage capacity announcements and execution time.
On the shortcomings, USB cassette player device is a bit like “toys” so the quality and durability is not high, if need long-term use should be carefully preserved. The accessories included are pretty bad, the USB cable is causing noise, low quality headset and content.
