Site icon Bia review

Dser RoboGeek 23T

Rate this post

amazon Dser RoboGeek 23T reviews

The Dser RoboGeek 23T is a basic Wi-Fi connected robot vacuum that doesn’t have all the perks of more expensive models but offers powerful suction and can fit most furniture thanks to its compact size.

If you have a lot of furniture with low ventilation, you don’t want a bulky robot vacuum bumping into it rather than cleaning underneath it. The $219.99 Dser RoboGeek 23T isn’t the best Wi-Fi-connected robot vacuum we’ve tested, but it has an ultra-low profile that allows it to slip through most furniture easily and provides Strong suction for size. However, if you can afford to spend a bit more, we recommend picking up the $299.99 iRobot Roomba 675 for outstanding battery life, navigation, and obstacle avoidance, though it’s also much bigger.
Design and Features

The Dser RoboGeek 23T is one of the most compact robot vacuums we tested, measuring 12.5 inches in diameter and just 2.83 inches tall, allowing it to clean under most couches and furniture another low. Design-wise, it looks a lot like the $349.99 Eufy RoboVac G30 (approximately 12.8 inches, 2.85 inches tall), but it’s just slightly smaller. The Roomba 675, meanwhile, measures 13 inches in diameter and 3.7 inches tall, making it the largest of the bunch to date.

At the top, the 23T has a W-Fi indicator, a power button, and an auto charge button to return it to the charging station. At the bottom, it has a main roller brush, two side brushes, an on/off switch and a drop-proof sensor that helps prevent it from falling down the stairs. It also has anti-collision sensors on the sides.

The vacuum offers up to 2,200pa of suction power, which is a great deal for any model, especially this compact model. It easily eclipses the Roomba 675 (600Pa) and is ahead of the iLife A9 (1,000Pa) and RoboVac G30 (2,000Pa).
The Dser RoboGeek 23T has several different cleaning modes, including Auto, Edge, Maximum, Single Room, and Spot. It cleans concentrated dirt areas in Spot mode by spiraling out about three feet, then spiraling inward to where it started. In Edge mode, it cleans along walls and around furniture legs. If you only need to clean one room, you can put the robot in it, turn on Single Room mode, close the door, and it will do an intensive cleaning in three minutes. In Max mode, it increases suction power for deeper cleaning. Max mode Increases volume and drains the battery faster. A feature called BoostGen will automatically increase suction when it detects carpet. You’ll probably use Auto most of the time.

The Dser includes a remote (and AAA batteries), but you can also use the Dserlife app (available for Android and iOS). The vacuum also comes with two physical boundary strips that prevent it from cleaning in certain areas, such as under your desk, where you have a tangle of electrical cords. Dser also includes cable ties that you can use to compact wires to prevent the robot from getting stuck in them, a cleaning tool, a set of side brushes, and an additional filter.
Establish

To set up the 23T, you need to plug in the charging dock and place it on a hard, flat surface against a wall. Dser recommends placing the charging dock three feet on either side of objects and facing anything six feet away. The charging dock has space where you can store the remote, so you don’t lose it. You then snap the side brushes on the bottom of the robot and activate it using the on/off switch. The Wi-Fi indicator will briefly flash blue when you turn it on, indicating that it is in connection mode.

From there, press the recharge button on top of the robot to let the robot go to the charging dock to initiate its first cleaning job. While waiting for charging, download the Dserlife app and set up an account. When you open the app, it will ask if you want to use Bluetooth; press OK. You can then turn on notifications if you want. To sign up for an account, enter your phone number, enter the code sent to you via text message, then create a password.

Once you are in the app, you tap the plus sign in the top right corner, and a list of robots will pop up; choose RoboGeek 23T. The app will then ask you to confirm that the Wi-Fi indicator is blinking quickly. Then enter your Wi-Fi password and wait for it to connect.

That is the same process as connecting any robot vacuum to its companion app over Wi-Fi. During testing, I had no problems connecting the RoboGeek 23T.
This application is very simple and easy to use. On the top left, you can see the current battery level of the robot, and on the top right shows the cleaning time. There are three buttons at the bottom: Home (which returns the robot to its base), Auto, and Remote. In the Remote Control section, you can navigate the robot with the arrows; turn on Auto, Edge, or Spot mode; send the robot home to its changing station; locate the robot if it goes missing by sounding an alarm change the fan speed.

Setting it up to work with Amazon Alexa and the Google Assistant wasn’t entirely intuitive, but I figured it out, and it works fine. For Alexa, you need to search and activate the Tuya Smart skill, then log in with your Dserlife app credentials, and you should be good to go. For Google Assistant, you press the plus button in the top right corner of the Google Home app, select Device Setup > Works with Google, then search for Tuya Smart and sign in with the app credentials Your Dserlife. Once set up, you can control the robot with commands like “Alexa, turn on my 23T” or “Hey Google, send back my 23T to charge.”

Before you start cleaning, you’ll want to tidy up the house a bit, pick up items from the floor like clothes, loose papers, and string the blinds. Although the robot has a fall-proof sensor, you may also want to use a physical barrier to prevent it from falling down the stairs.

The RoboGeek 23T requires the same maintenance as most other robot vacuums. After each cleaning, you should empty the dustbin, clean the filter once a week, and wipe any debris on the cliff sensors about once a month. You will also need to regularly clean the main and auxiliary brushes, especially if you have long hair or live with someone. Some robot vacuums can empty their trash, like the iRobot Roomba S9+, but they are more expensive.

Performance

The RoboGeek 23T cleans in a random pattern. Today, most robot vacuums clean in a systematic manner, creating straight lines to cover the room effectively. The RoboGeek 23T will hit a wall and then turn the other way, zigzag around your house. It still gets the job done, but it won’t create neat vacuuming lines across your carpet like a robot vacuum with smarter navigation.
It has a 2,600 mAh battery that Dser says allows for 100 minutes of continuous cleaning. In testing, it was cleaned for 80 minutes in Auto mode before the battery ran low. At that point, it stops vacuuming and starts going back to the charging station. He had to take a detour to the other side of my house on the way there, and I was afraid he might find his way back. But after 25 minutes of searching, it finally got into the charging dock.

Eighty minutes of cleaning isn’t the best battery life we’ve seen, but it’s not bad. Most of the competition in this price range lasts close to 100 minutes.

What the RoboGeek 23T lacks in battery life, it makes up for in power. I was surprised to see it had many dog hair on the white carpet that my brown pitbull Bradley loves to lie. After a full clean, I could barely see any remaining hair. After two full cleaning jobs, the trash can was full of dust, dog hair, hair from pillows, even a few bits of dog food.
During the first two runs, the RoboGeek 23T didn’t get stuck once. It even fits in my couch – a place many other robot vacuums have stuck – and ejects a few dog toys from under it. Once, it got caught in a long curtain covering my office floor and again on the phone charging cord on the ground during the next two runs. That said, it’s not uncommon for other robot vacuums to stumble in similar situations.

The scheduling feature works without problems. Using the remote control or the app, you can choose which days of the week you want the vacuum to run and at what time. In testing, it was turned on in Auto mode at a scheduled time.

You can schedule it to clean when you’re out of the house, but it’s quiet enough to run when you get home without disturbing you too much. Dser says the RoboGeek 23T runs at 58db, which, according to OSHA, is quieter than a normal conversation. I can turn it on while working, and it won’t bother me like larger robot vacuums like the Roomba 675.

Compare and conclude

The RoboGeek 23T’s 2,200Pa size and suction power make up for its many shortcomings. It’s like a more affordable, less feature-packed version of the $349.99 Eufy RoboVac G30. Both have compact designs and provide strong suction power. The RoboVac G30 gets an upgrade, offers smart navigation for systematic cleaning and slightly better battery life, but it’s $130 more expensive. That said, we still prefer the $299.99 iRobot Roomba 675 over both of these models. It’s not compact but rarely jams and offers the best battery life and navigability of the three.

Advantages
Good price
Strong suction
Slim, compact design
Scheduling support
Works with Amazon Alexa and Google Assistant voice commands

Defect
Random cleaning
Short battery life
Don’t map your home to virtual boundaries

where can you get a Dser RoboGeek 23T online

Robot Vacuum, dser 23T 2200Pa Robotic Vacuum Cleaner, Wi-Fi Connected, 2 Boundary Strips, Self-Charging, Multiple Cleaning Modes Vacuum for Hard Floor Carpets and Pet Hair, Work with Alexa: Buy it now


Pamer

manual

[collapse]
Exit mobile version