Site icon Bia review

Fujifilm X-A1

Rate this post

amazon Fujifilm X-A1 reviews

The Fujifilm X-A1 is the smallest and lightest model of the Fujifilm. This is the only model in the X Series that does not use Fujifilm’s proprietary X-Trans sensor and instead uses the usual APS-C CMOS sensor. However, X-A1 still has great surprises with good image quality and will not be much different from X-M1 if users only take JPG images and use less raw images.

In addition to the 16.3-megapixel sensor, the camera has a 49-point focusing system, ISO 200-4400, continuous shooting speed of 5.6 frames per second, and full HD 30 frames per video. paper. The Wi-Fi connection also allows for remote control as well as sending and receiving images with smart mobile models running iOS or Android.

The Fujifilm X-A1 looks quite similar to the Fujifilm X-M1 if it only looks at the black version but differs a lot in the other color options. There is no silver version like the X-M1 so the black and blue of the X-A1 in the upper section is quite clear plastic material so poorly suited and suitable for young users only. As with the red version, the silver part is quite metallic, so it’s more “Fuji” than the other two. The overall design is not much different from the seniors, but the color choices make this model reach a truly different audience.

The X-A1 is extremely compact and one of the smallest mirrorless models currently available. The machine has a slightly raised front grille and a small area with plastic spines that make the thumb for the thumb, so it is easy to hold the machine with one hand. The other hand can provide support when supporting the body and lens under easy shooting conditions.

The control system of X-A1 is quite simple but adequate for many shooting situations. In addition to the wheel mode, the wheel is usually adjusted to adjust the brightness is quite convenient (writers often use shooting mode A for many situations). Small rear wheel can be used to adjust the lens with no lenses on the body or to adjust the zoom when playback. Also, when viewing images, instead of having to zoom in multiple stages, users simply need to press the shutter button to select continuous shooting mode, the image automatically zooms to the highest level at the focus point allowing the user to check. Image sharpness right after shooting.

In addition to the other basic nodes, the Q key is a very reasonable option that allows the user to see snapshot and capture settings when needed. Convenience also comes in the ability to intelligently white balance, when pressing the WB button, the machine displays the mode quickly. If you choose Custom, just take a white frame is the machine will select the appropriate K.

For the Fn key at the top, users can select the parameters they want to set. Writers often choose this button for ISO level or change. When viewed, this button quickly turns on photo or video sharing via Wi-Fi with mobile devices (must install software on iOS or Android) quite handy.

The X-A1 has a built-in flash, but the bouncing mode is so powerful that newcomers can have a “heart attack” and worry about endurance. When turned on, the headlamps will be forward, giving wider shots and better access to the lens than the fixed lights on the camera body.

where can you get a Fujifilm X-A1 online

Fujifilm X-A1 Body – Blue Compact System Camera, Body Only: Buy it now

Fujifilm X-A1 Kit with 16-50mm Lens (Black): Buy it now

Fujifilm X-A1 Kit 16-50mm (Indigo Blue): Buy it now

Fujifilm’s new mirrorless model uses a 3-inch screen with a very sharp 920,000 pixel resolution. Colors slightly “flatter” a bit compared to the actual image but not much difference. The viewing angle is wide and the outdoors is not glare. This screen has a flip-flop that helps to capture high or low angles very conveniently, but open-cast cable also makes owners worry about persistence.

The most unfortunate point about looking at the X-A1 specifications is the APS-C CMOS sensor with the traditional Bayer color scheme instead of Fujifilm’s proprietary X-Trans sensor. This is also the key to the machine much cheaper than the X-M1. The X-M1 and X-A1 both have a resolution of 16.3 megapixels and a size of 23.6 x 15.6 mm.

Difference between image quality between two machines with the same sensor is very difficult to distinguish from the new players (the object that X-A1 is aiming for), especially when using only JPG images. Fujifilm still has a brilliant color and quite strange on the X-A1 although not the same type of sensor technology as the X series products left. The machine is sensitive to human skin color and gives warm yellow honey eye catching color. Contrast also gives a sharper feeling than other models in normal mode but gives the impression of detail and clear.

The test images with X-A1 are taken at the highest resolution, Fine mode is best, only for JPG images, the size of each file is about 6 MB. Noise control is very good in the range of ISO 100 to 6,400. At an enlarged 12,800, the noise starts to appear quite clearly and the image can be used at small sizes while at ISO 25,600, the image breaks down pretty well but not to a point where it can not be used. For RAW images, the camera only supports up to ISO 6,400 and the noise comes from ISO 800.

In terms of speed, the X-A1 is faster than the X-E1 and X-Pro1, which are more expensive than the EXR II. With a shutter lag of just 0.05 seconds, the difference brought about is almost impossible to spot. The speed from the button to SD / SDHC / SDXC card recording is pretty fast while simultaneously shooting RAW images, this time up to 5 seconds.

The fact that the camera can shoot continuously at 5.6 frames per second in succession with about 30 quality JPEG or 10 RAW images (depending on the memory card). At a speed of 3 frames per second, it can shoot 50 JPEGs at a time.

Exit mobile version