amazon HP Proliant DL380 Gen9 reviews
HP took a long time to review the market of Gen7 and Gen8 to determine the best method. The end result is a more extensive system that allows businesses to pay only for what they need right now and just leave the room to upgrade now. The first thing HP did was to align the product lines to overcome the failure of the Gen8 ‘p’ model and Gen8 ‘e’.
This makes the selection simpler than ever with the DL380 Gen9’s E5-2600 3rd-generation processor to improve performance, so you can easily edit the hardware to fit it. fit your workload. Of course, DDR4 memory speeds are very fast and will depend on the options on the Menu but the energy will be used effectively and the storage capacity has also been improved optimally.
The inside of the HP Proliant DL380 Gen9 is more neatly arranged than the Gen8 with more upgraded parts.
Improved storage capacity
The base system starting with HP B140i’s Smart Array supports 10 SATA hard disks and Array RAID5. Adding an Array P440ar brings 12Gbps SAS to run the system and its appearance is that you won’t lose a PCI-Express slot at all. 2GB FBWC buffer memory and its contents will be protected by an all-new 96W high-performance Li-Ion battery.
The most obvious change is that the front panel with its 8 + 8 + 8 configuration allows you to Add Blocks 8 SFF hard disks as required. The P440ar controller supports up to 26 SFF drives and HP allows you to optionally expand SAS which means you no longer need to add a RAID card if you’ve installed more than eight drives.
You may wonder, where did the two SFF drives go. HP has redesigned the PSU by making it 20% smaller and equipping it side by side in the back so the space above can be used to add two Hot-swap drives.
The chassis also supports 12 LFF drives if you don’t want the second riser card in the back, you can add an option and increase the number of drives to 15.
The updated iLO4 interface includes multiple groups to manage multiple servers easily.
Details about HP Proliant Gen9 Server
HP Proliant DL380 Gen9 server is provided with more transmission media such as providing USB 2.0 and access port to VGA card. Even in this position, you can add two SFF drives right below.
Meanwhile, Gen8 servers only have FlexibleLOM network options, HP has redesigned and integrated 4 Gigabit ports on the motherboard. Most Gen8 customers are allowed to buy cards outside 4 ports anyway so it can provide as a standard version.
Currently, servers support DDR4 memory up to 768GB and use 32GB DIMM. With 128 GB DIMM capacity, this can be pushed to an application busting up to 3TB and you’ll save a lot more time when using.
HP SIM provides general network management tools for all SNMP compliant systems.
where can you get a HP Proliant DL380 Gen9 online
Hp Proliant Dl380 G9 2u Rack Server – 1 X Intel Xeon E5-2620 V3 2.40 Ghz – 2 Processor Support – 16 Gb Standard – 12gb/s Sas Raid Supported Controller – Gigabit Ethernet – Raid Level: 0, (777337-s01): Buy it now
HP ProLiant DL380 G9 2U Rack Server – 2 x Intel Xeon E5-2660 v4 Tetradeca-core (14 Core) 2 GHz – 64 GB Installed DDR4 SD: Buy it now
HEWLETT PACKARD Enterprise ProLiant DL380 Gen9: Buy it now
Power source for the server
The system is rated to be supplied with a pair of 14-core Xeon E5-2695 2.3GHz v3 that provides an impressive figure of 56 as the core.
The performance of HP drives paid off when we measured systems that were considered to have a modest power of 90W during idle and peaked at 352W under extremely large loads. Compared to the hardware with Dell T630, the T630 waste 120W in idle and peaked at 390W.
HP has tightened up their support server, you can only access it to update the ROM BIOS firmware regularly with a valid warranty or support contract. However, it will provide an open access system for important firmware updates regardless of the support agreement.
IOS online applications provide an insight provided by the cloud monitoring system (in-cloud) for registration on the HP system.
Management capabilities of HP Proliant DL380 Gen9
HP’s iLO4 v2.0 system now has a dedicated Gigabit port and Federation will manage multiple servers from a single system. Put them in a group and you can monitor its running status, power control and power usage for automatic capping.
While the iLO4 provides management capabilities on the system, HP spreads that in place with its latest SIM (Systems Insight Manager) and OneView. The latter will provide a unique view of all managed servers, storage networks and virtualization environments.
HP has pushed into the cloud as well as with new online applications (Insight Online app). We load it on our iPad and when logging in with our Passport account, the manager can view the registration system, monitor support cases and check important people included in the contract.
Conclude
Not surprisingly, the DL380 Gen9 is HP’s best-selling because it always offers an impressive range of features. The new DL380 Gen9 model built on these successes includes capacity upgrades and improved energy efficiency, its new design is even more scalable.