Opticon H-27

amazon Opticon H-27 reviews

Design

Opticon H-27 has caused attention to be placed in a rather large box. On the box is also featured in the words Android Industrial Smartphone.

The machine itself has a size not small, especially thickness to double, triple the usual smartphone today. Other notable point is the emergence of four touch navigation keys on the phone are familiar with Android 4 or earlier.

At the top edge features cluster enables barcode scanning sensor similar to other products of Opticon. With this design, can assert Opticon H-27 is a barcode scanner cum smartphone running the Android operating system.

The included accessories Opticon H-27 is also quite fancy. A charger with style, similar in size to a laptop charger types with output 5V – 3A. This charger also comes with a microUSB jack transition to new rechargeable machine. It also includes a headset and data cable connector comes.

Although quite large in size but Opticon H-27 was not too heavy, just 244g. The entire body machine is made up of the resin with friendly material, non-slip and dirt. According to the manufacturer, Opticon H-27 can withstand impact resistance and dropped from a height of up to 1.5m, waterproof to IP65 (protection against low pressure water pouring from every direction, water limited), operating at temperatures from -10 degrees or 50 degrees C, the wet environment, good to meet the peculiarities of the industry. Therefore, the micro USB port and headphone jack are rubber cap to avoid water. However, the power button is placed on the top edge and sink should be a little difficult to work. While other buttons to increase or decrease the volume, scan the barcode (including the 2 side) is made convex up and has a good bounce so easy clicks.

At the bottom edge is the appearance of a rather strange connector with 10 pins exposed. This is the place to connect Opticon H-27 with a charging dock accessory (sold separately) to support faster charging. This charging dock can charge more for the machine has a battery charger.

At the back of the Opticon H-27 is a camera with 5MP resolution and flash and also arranged in a very strange position near the middle of the body, right next to the loudspeaker with large size. Below is a removable back cover featuring NFC connection icon. Remove the back cover to be able to access the 2860mAh capacity battery. Users will have to remove the battery to insert SIM and micro SD memory card (supports up to 32GB). Pin of the Opticon H-27 can be attached to a private dock for charging.

Screen

Opticon H-27 4.3-inch screen resolution of 480×800 pixels, pixel density of 217PPI, relatively low if compared to current smartphones. Quality inadequate screen, the image is not sharp, slightly blurred and porous. Pale colors, renders gold, contrast, brightness low and narrow viewing angle, color variation vulnerable, contrast when tilted slightly. But because this is not just simple phone that aims to become a part-time barcode scanner to add quality to your phone screen may be acceptable. This screen surface is coated with anti-glare so you can see better in the sun, but is not yet effective. The screen is also protected by a layer toughened glass of Corning Gorilla Glass 2.

Performance

Configuration, Opticon H-27 is equipped with a Qualcomm Snapdragon S4 processor with 2 core 1.5 GHz and 1GB of RAM, 8GB of internal memory runs Android 4.2.2. This configuration is quite common in high-end phones like the Lumia 2012 at 920, Motorola RAZR M, HTC One X (AT & T version) and the Galaxy S III (US version). The basic operations such as calling, messaging, gaming and installing Android apps, listen to music or take photos, and the lag just a little bit slow, but remain stable.

Barcode scanning capability

With a scanning speed CMOS sensor 60 fps support from 1D code types to 2D (1D code separately, the scanning speed can be up to 100 hp / sec), barcode scanning capabilities of Opticon H-27 is very impressive. The machine can scan the code on the types of materials and print smooth matte or in the absence of light. The integration of connectivity such as 3G, WiFi, NFC, Bluetooth or GPS Opticon H-27 enables scanning and transmitting real-time data through the system through software solutions are built on the Android platform or web .

H-27 built-in bar code scanning system in the kernel of the operating system. Just open interactive software, press the scan button on the object being put sensors. You can also tweak the settings right on the accompanying software instead of having to scan the QR code as complicated as the previous model.

Android platform comes with connections also support the application of Opticon H-27 is quite rich. Typically in the work environment in the delivery companies such as EMS, DHL, Fedex … H-27 can be applied in the management of shipments, data transmission to the system to check in, check out and track orders.

Or in the medical environment, patients are managed with the corresponding bar code, doctor holding just under the H-27, scan the barcode sticker on the clothes or in the patient’s neck can know everything information, the patient’s condition on the screen without having to waste time investigating medical records and other types of records.

The fields related to product management, goods and personnel, check in, check out … all that can be applied to control and manage the barcode, QR code Opticon H-27 code and to minimize the stitching or search input.

Battery life

With a 2860mAh battery, Opticon H-27 fully meet the use of high intensity due to the configuration is not too strong. According to the manufacturer announced, if you open the screen constantly onscreen with 3G connectivity, the machine will withstand up to 8 hours. A special feature is the replacement of the battery, you do not need to power off and then lift the battery is hot-swappable, but always through hotswap feature. Machine built 1 extra batteries in with 80mAh capacity sufficient to maintain CPU and RAM for normal operation in a few minutes when you remove the main battery. And when fitting new batteries into the user can continue to use immediately without worrying about data loss.

where can you get a Opticon H-27 online

Opticon H-27, Android 4.3, 2D, laser Cam, Wi-Fi, Bluetooth, 13281 (Cam, Wi-Fi, Bluetooth NFC, 3G, 4G, TLF, incl.: battery, USB-DC cable, USB cable, power adapter): Buy it now

Opticon H-27, Android 4.3, 1D, laser Cam, Wi-Fi, Bluetooth, 13280 (Cam, Wi-Fi, Bluetooth NFC, 3G, 4G, TLF, incl.: battery, USB-DC cable, USB cable, power adapter): Buy it now

Summary

Running the Android operating system fully integrated with the features of a smartphone, Opticon H-27 is no longer a simple barcode readers that proximity to the PDA, smart pocket devices, very suitable for mobile users work, combining automatic identification equipment and the business, providing the ability to manage remote devices and advanced security features, creating a solution that is ready for the enterprise.

Some basic features of barcode scanners Opticon H-27:

+ Global Warranty 2 years.

+ Moderate weight (244g), at a height of 1.5m shockproof, waterproof IP-65 standards, operate in temperatures from -10 to 50 degrees C.

+ Support for flexible connectivity from Bluetooth, WiFi 802.11 a / b / g / n, NFC, GPS … high compatibility.

+ Running Android OS, fully integrated feature of smartphones, easy to use.

+ Scan on slick material, reflective, transparent, curved surfaces, scan both 1D and 2D codes.

+ Scan and decode the high-compression code, complex.

+ Scan is an LCD such as phones, tablets, PCs.

+ Scan in low light or darkness, high scanning speed of up to 60fps.