Site icon Bia review

Porsche Design Motion One

Rate this post

amazon Porsche Design Motion One reviews

Specifications:

Bluetooth: Bluetooth v4.1 with aptX codec

Driver: 8.6mm neodymium driver

Frequency: 20-20kHz

Sensitivity: 95 dB ± 4dB (IEC-318 at 1KHz)

Impedance: 16 ± 15% Ohm

Pin: 140mAh

Weight: 45g

Time of use: 10h

The Motion One headset is neckbanded when taken out of the box, a headset that “rings late” than headphones or earbuds, It is not inferior to the “elder” with the advantages listed easy: design fashion, compact, not tangled wire, long use time …. And obviously, Motion One too Enjoy these advantages.

Motion One’s design is similar to many other sports headphones or wireless headphones on the market today, but that does not diminish the value of this headset. The neck of the listener is thin rubber wrapped outside, this part is very light weight (probably less than 200g) should wear for a long time does not cause discomfort.

At the two ends connected to the wire (each with the symbol R and L to distinguish):

– right (R): power button / bluetooth connection button (flashing status light), microphone hole, micro USB port, external KEF

– Left (L): There are buttons to play or pause music / receive calls, increase the volume, the outside is the words Porsche Design

The charger and rubber cover are made quite sturdy, waterproof or IPX5 compliant sweat. There is a small point I do not like the button to play or stop the music / receive calls, increase the volume is placed near each other and the design is quite similar, so when clicked you may be hit wrong, take a bit time to get acquainted.

The Motion One ear buds, with the R and L symbols on the inside, run alongside the device and are relatively short, so they are almost unobstructed, and in addition the two earbuds Magnets are inhaled together to fix, minimizing the tangled wire and also tidy when worn on the neck or stored. 2 earrings are designed with sharp edge cut edge, made of material is the perfect combination between aluminum and Titan to create a luxurious and elegant style for the user (the exterior is engraved logo quite impressive. The interior is still the dominant white R and L.

The use of silicone mattress is angled at an angle of about 45 degrees from the axis of the ear, giving a good fit, smoothly wearing, and no bumps. This design also reduces the pressure on the ear, avoiding the feeling of fatigue. For a long time, and due to the tightness of the ears, the sound is very clear and the sound is good.

The unique feature of Motion One is that you can disassemble the earpiece from the clasp and replace it with a 3.5mm cable to act as a normal wired headset.

This is clearly a rare thing with a wired headset or neckband headset, and this adds to the versatility of the Motion One headset. In addition, one extra point is the outer edge of the two ear can turn multi-direction (about 20-25 degrees to each side of the headset).

However, there is one disadvantage with this headset, that when you use a 3.5 mm headphone jack, you can only use it to listen to music and play / pause or increase the volume by adjusting the source. If you want to receive a phone call or use the controls, you have to switch to a neckband with a bluetooth connection, because the 3.5 cable does not come with this feature.

Advantages

+ Fashionable design, sophistication and luxury.

+ Flexible switch between 2 forms bluetooth and cable

+ Long time use, no noise

+ Clear sound and details

Defect

+ Less color choices

+ There is no volume control knob and mic for cable connection

+ Lack of bass, narrow field sound

where can you get a Porsche Design Motion One online

KEF Porsche Design MOTION ONE In-Ear Bluetooth Headphones: Buy it now


Pamer
[collapse]
藍牙耳機 蓝牙耳机 manual
Exit mobile version