Sonus Faber Venere 3.0

amazon Sonus Faber Venere 3.0 reviews

Elegant appearance

Venere speakers are young and dynamic, suitable for modern rooms thanks to the flexible lines on each edge. For that reason, its color is quite varied. There are three color palettes for this speaker line: lacquer black, lacquer, and real wood. Each color tone has its beauty. Black exudes mysterious elegance, fits in dark interior style, or accentuates the idea of ​​black and white decor. White is young and strange, suitable for simple rooms in bright, elegant, and elegant tones. The wood color is easy to integrate with many interior styles, especially the rooms of many furniture such as chairs and cabinets. The rear part is bent in a decreasing direction. The acoustic design with the best standby radiated power eliminates turbulence due to the interference wave inside the enclosure to reproduce a more realistic sound.

For the product to reach the Sonus Faber fans at affordable prices, the Venere line decided to start production in China. That is a gesture expressing the confidence of the famous Italian speaker. All technical drawings are finished in Italy and shipped to the Chinese factory. Of course, no matter where it is produced, it still has to meet the standards of Europe’s leading hi-end speakers. With a price of $5000 for Venere 3.0 speakers, this is a worthy effort.

Venere 3.0 is designed for rooms larger than 30m2, with a 3-way structure consisting of 2 bass, one mid, and one treble. The loudspeaker is quite large, nearly 120cm high, 34cm wide, and 45cm deep. The entire cabinet was placed on an iron pedestal with four sturdy nails. The loudspeaker stands behind, with two lower legs behind the front two. With this very “stand-up” stand, the speakers are both impressive and elegant while meeting design intentions that make the high frequencies sound a bit higher than the low-frequency range so that the listener feels. All three frequency bands are in harmony.

Quality components, high-end structure, and efficiency

Perhaps what the audiophiles are interested in is what material is made of and what do they produce? The answer is that all of the speakers in Venere 3.0 are from a leading European speaker manufacturer, a German factory. 29mm diameter silk-screen dome tweeter with high-frequency reproducibility up to 25kHz. 150mm diameter midrange sheath with polypropylene molded thermoplastic film, super dynamic and linear. The loudspeaker is made with a technique for stamping ripples on the membrane, which helps suppress the resonance when the sound emits. Two 180mm diameter bass speakers and midrange speakers.

The cabinet structure is divided into four compartments, in which the treble and mid-treble chambers are closed separately. The two sections of the two bass speakers communicate through a small hole to create a resonant effect for deeper bass. The vent is designed in front of and near the bottom of the speaker. Making it easy to position the speaker against the wall without the need for low-frequency resonance. The individual chassis structure will help the speakers work accurately, independently without causing vibration to impact each other. Especially effective is the pair of bass speakers played at low frequencies, causing a lot of vibration inside the speaker. The private cavity has isolated not to affect the mid and treble.

The frequency divider is designed to cut at 180Hz, 220Hz, and 2.300Hz. All components are thoroughly selected before being manually inserted into the circuit board. Conductors are silver-plated, special lead-bonded joints with extremely high.

where can you get a Sonus Faber Venere 3.0 online

Sonus faber Venere 3.0 Floorstanding Speaker (Pair, Walnut): Buy it now

Sonus faber Venere 3.0 Floorstanding Speaker (Pair, Black): Buy it now

Sonus faber Venere 3.0 Floorstanding Speaker (Pair, White): Buy it now

Mix and experience

Venere 3.0 has a 6Ω impedance, a sensitivity of 90dB, maximum output of 300W, a low-frequency response of about 38Hz, and a peak of 25kHz. We chose Unison Research’s Secondo amplifier for this pair of speakers.
This amplifier has a capacity of 100W / channel, costing $2500 (equal to half of Venere 3.0 speakers). Composite candidates will perform better than the Accuphase E 470, but the price of this amplifier is quite high compared to the pair of speakers, asymmetric in terms of investment.

The first demo of the song was played quite fast – “A lover in Berlin” by Kari Bremes. That is a very good record for an audiophile. The music is reproduced in quite a wide space. The singing of Kari Bremes is evocative, evident on the bass soloist’s solo background, the piano, and the softly lighthearted drumbeat. The first impression is Venere 3.0 performance is extremely standard, sound quality, all three bands are neatly reproduced, sharp.

Another song is “Give The Night” from Casual Lounge with Smoma. This release demonstrates the ability to perform decisively without the lag and lags of the speakers. The singer’s vocal is smooth, relaxed on the background of music with fast rhythmic rhythm, sound stage expanded and deep with many layers of instruments. This performance also shows that Venere 3.0 is well-suited to powerful, fast-moving remixes.

When the audition was over, the overall impression of the Sonus Faber Venere 3.0 loudspeakers was outstanding, the standard performance style that covered most of the value of a full-range speaker. The sound on hi-res recordings reproduced by Venere 3.0 is realistic, detailed. On the other hand, the loudspeakers handle the highs in speedwell, no tangle in the complex orchestration, producing smoothly and smoothly the marginal notes above and below its nominal range.

With Venere 3.0, Sonus Faber shows youthfulness in creative ideas and orientation towards modern customers. How Sonus Faber locates, this product indicates that celebrity labels have been trying their best to follow the trends of contemporary cultural markets. The Italian speaker wants to understand the market demand better and serve the customer.