How to change wifi mode on linksys velop

Changing the WiFi mode on your Linksys Velop system can help optimize your network performance, especially if you want to adjust the settings to accommodate specific devices or usage scenarios. Here’s a step-by-step guide on how to change the WiFi mode on your Linksys Velop system:

Using the Linksys App

The easiest way to change WiFi settings on your Linksys Velop system is through the Linksys app. Here’s how to do it:

1. Download and Install the Linksys App
   • If you haven’t already, download the Linksys app from the App Store (iOS) or Google Play Store (Android).
2. Open the Linksys App
   • Launch the Linksys app on your smartphone or tablet.
3. Log In
   • Log in with your Linksys Smart Wi-Fi account. If you don’t have an account, you can create one within the app.
4. Access Your Velop Network
   • Select your Velop network from the app’s main dashboard.
5. Go to WiFi Settings
   • Tap on the menu icon (three lines) in the upper-left corner to open the navigation menu.
   • Select “WiFi Settings” or a similar option from the menu.
6. Change WiFi Mode
   • In the WiFi Settings menu, you may see options such as “WiFi Mode” or “Network Mode.” The exact wording may vary.
   • Select the desired WiFi mode. Options may include settings like “Mixed,” “802.11ac only,” “802.11n only,” etc.
   • Adjust the settings according to your preference. For instance, setting the network to “802.11ac only” can ensure that only devices supporting the ac standard will connect, which might improve performance for those devices.
7. Save Changes
   • After making the desired changes, save your settings. The network might temporarily disconnect and reconnect as it applies the new settings.
8. Restart Devices
   • It’s often a good idea to restart your connected devices to ensure they reconnect properly under the new settings.

Using a Web Browser

If you prefer to use a web browser to change your WiFi settings, follow these steps:

1. Connect to Your Velop Network
   • Make sure your device is connected to the Velop WiFi network.
2. Open a Web Browser
   • Open your preferred web browser and enter http://myrouter.local or the default IP address 192.168.1.1 in the address bar.
3. Log In to the Velop Interface
   • You’ll be prompted to enter your admin password. This is the password you set up during the initial configuration of your Velop system.
4. Access WiFi Settings
   • Once logged in, navigate to the “WiFi Settings” section. This might be located under “Wireless” or a similar tab.
5. Change WiFi Mode
   • Look for the WiFi mode or network mode settings. You can select the desired mode, such as “Mixed,” “802.11ac only,” etc.
6. Save Changes
   • Apply and save the changes. The system might reboot, causing a temporary disconnection.
7. Restart Devices
   • Restart your devices to ensure they connect under the new settings.

Tips for Changing WiFi Mode

• Understand the Implications: Changing the WiFi mode can affect which devices can connect to your network. For example, setting the network to “802.11ac only” will prevent older devices that do not support the ac standard from connecting.
• Network Optimization: Adjusting the WiFi mode can help optimize network performance. If you have a lot of newer devices, setting the network to a newer standard (like 802.11ac) can provide better performance.
• Compatibility: Ensure that the devices you want to connect are compatible with the selected WiFi mode. Mixed mode is often a good compromise if you have a variety of older and newer devices.
• Channel Settings: While adjusting the WiFi mode, consider also looking at channel settings to reduce interference from other networks. This can often be found in the same WiFi settings menu.

Troubleshooting

If you encounter issues after changing the WiFi mode:

• Revert Changes: If the new settings cause problems, you can revert to the previous mode.
• Firmware Update: Ensure your Velop system firmware is up-to-date.
• Factory Reset: As a last resort, you can perform a factory reset to restore default settings. Note that this will erase all custom settings.

By following these steps, you can easily change the WiFi mode on your Linksys Velop system to better suit your network environment and device requirements.