Site icon Bia review

RAZER TIAMAT 7.1 V2 GAMING HEADSET

Rate this post

amazon RAZER TIAMAT 7.1 V2 GAMING HEADSET

RAZER TIAMAT 7.1 V2 GAMING HEADSET – REFRIGERATING A SPACE OF REAL SURROUND SOUND WITH 10 SPEAKER SYSTEM

SUMMARY

A big game to see if people admire it? Ok, one big game for Razer in 2017 and the second one to excel: Razer Tiamat 7.1 V2. The 7.1 surrounds sound real (not virtual) headphones are super terror with 5 sub-speakers on each side of the earbud, the upgraded version of Tiamat 7.1 (V1) from 2013 has stormed the market. Until early 2019, this version of True Surround gaming headset still has no competitors in technology.

Tiamat is the name of the 5-headed Dragon god in Mesopotamian mythology, the most peaceful in the beginning, and the most chaotic things for the world are brought by this Dragon goddess. Razer has deposited the name Tiamat into the line of True Surround Razer Tiamat 7.1 headphones to refer to 5 “dragon heads” on each ear and the “chaos” that this headset line brings to the gaming world. Just as according to Mesopotamian mythology, Tiamat was killed by Marduk and cut into two parts, also from Marduk’s hand that these two parts created Heaven and Earth. If Razer Tiamat 7.1 (V1) is “Earth”, then surely Razer Tiamat 7.1 V2 is representative of “Heaven”.

So what does the Razer Tiamat 7.1 V2 have messages from Razer?

BASIC PARAMETERS

Real surround sound with a total of 10 speakers on either side.

Subwoofer:

– 40mm Titanium coated with Neodymium magnet

– Frequency response: 20 Hz – 20,000 Hz

Impedance: 16 Ω

Sensitivity @ 1 kHz: 118 dB ± 3dB

Front speaker:

– 30mm with Neodymium magnets

– Frequency response: 20 Hz – 20,000 Hz

Impedance: 32 Ω

Sensitivity @ 1 kHz: 118 dB ± 3 dB

Rear speaker:

20 mm with Neodymium magnets

– Frequency response: 20 Hz – 20,000 Hz

Impedance: 32 Ω

Sensitivity @ 1 kHz: 118 dB ± 3 dB

Center speaker:

– 30 mm with Neodymium magnets

– Frequency response: 20 Hz – 20,000 Hz

Impedance: 32 Ω

Sensitivity @ 1 kHz: 115 dB ± 3 dB

Edge speaker:

20 mm with Neodymium magnets

– Frequency response: 20 Hz – 20,000 Hz

Impedance: 32 Ω

Sensitivity @ 1 kHz: 118 dB ± 3 dB

Accessories:

– The plastic cap covers the ear cups

– Instruction book

DESIGN OVERVIEW & DETAILS

In 2013, Razer launched the first Razer Tiamat 7.1 (V1) with a total of 10 binaural speakers for surround sound that reproduces extremely realistic space and has no competitor technology at the time. that point. In 2017, the Razer Tiamat 7.1 V2 version improves both in design and sound quality. First of all, let us compare the new design in V2 version which is particularly remarkable compared to V1.

Metal top frame

First of all, it is necessary to mention immediately the bad detail that the 2013 version was stoned by gamers mercilessly: The head frame of the headset is completely made of plastic! Now with the V2 version, there is an aluminum head frame that looks quite luxurious and has good elasticity. The most important thing in this detail is to bring a sense of peace of mind for users when they do not have to worry about “whether it will break” in its predecessor. The head cushion area has also been redesigned to a flat and soft surface, which will be better when gamers are not feeling “uncomfortable” like the floating cushions in V1 version. Mesh cushion is also an advantage to mention when it feels cool, does not accumulate sweat like the design of leather cushions.

“Show off” delicate speakers

Second, we must also warmly praise Razer for its late 2017 design: You won’t find any of the Razer Led Logo on top of the Razer Tiamat 7.1 V2 as a bit gimmicky in the V1 version. Razer has started to have a certain flair when placing the backlight on the back of the subwoofer speakers on each side of the housing, from here when we look inside through the dark mica, the subwoofer lights will stand out. The Razer Tiamat 7.1 V2 earbud now feels a very large space containing a “sky of technology” inside, partly due to the backlight itself shining a light on the shape.

For the gaming headset world, this housing design of the Razer Tiamat 7.1 V2 as well as the V1 is still unique, redundant in the sophistication to be able to strongly identify the brand and style to be attached to each costume device of Razer’s gaming world.

Compact microphone but not enough “hi-end”

The way that Razer designed the integrated microphone for Tiamat is always so convenient because when using it, you just need to lower and fold up, you don’t have to worry about every time you remove the headset, put on the table, the mic is bent. Again the Tiamat 7.1 V1 life microphone has many “fierce” sharp bevels and can be extended, maybe we would wish Razer to use that design again, it’s so beautiful!

The leather sponge has a thick core to create a large space

Instead of the round design of the earcups like most other headsets, the Razer Tiamat 7.1 V2 retains the thick square cushion design from the V1 era, only slightly different in terms of the angle.

The ear canal can rotate

The ear canal is bidirectional, one way 90 °, and one way about 25°.

Integrated control panel

People often call this a “soundcard”, but I need to correct the Razer Tiamat 7.1 V2 without a soundcard but completely use Analog, the original signal is connected by 4 3.5mm jacks (plus 1 jack in pink is a microphone like a headset with another mic) on the mainboard of the PC. A separate USB cable has the main function of raising the RGB led on the inside of the housing and letting the Razer Synapse software recognize and control the Tiamat 7.1 V2 using the on-screen interface.

FEATURES & TECHNOLOGY

Behind the panel are 4 connection ports for additional external speakers

With today’s popular demand, we still often use external speakers to listen to music and use headphones to play games. Foreseeing that need, behind the integrated console of the Razer Tiamat 7.1 V2 is invested 4 ports serving 3.5mm jacks to serve both 5.1 and 7.1 speaker systems besides the Stereo speaker systems. When switching between speaker and headset, just press the middle button.

Along with this panel, we can individually adjust the volume of each Center, Front, Sub, Side, Rear, (and microphone) speakers individually with the small knob indicated above. Unfortunately, this knob area has no LEDs, so it is difficult to see in a dim environment. Note that to individually adjust the volume of each subwoofer, we need to enable 7.1 surround sound with the small button on the bottom right on the control panel.

Below is a large knob to adjust the volume with the led volume indicator. To temporarily mute, we push the knob down like a button, at this time the mute icon just below will light up. This mute button presses quite hard and heavy, the experience is not very comfortable.

The last little button should be mentioned at the bottom left that mutes the microphone to avoid accidental right-clicking.

where can you get a RAZER TIAMAT 7.1 V2 GAMING HEADSET online

Razer Tiamat 7.1 v2 Gaming Headset: Dual Subwoofers – Audio Control Unit – Rotatable Boom Mic – Works with PC – Classic Black: Buy it now

Razer Tiamat 7.1 V2 – Analog/Digital Surround Sound Gaming Headset (Renewed): Buy it now

PRACTICE EXPERIENCE

The ear canal can rotate

The horizontal rotation of the ear canal is quite convenient. The other direction can be rotated by about 25 ° so that it can fit completely into the contact position before and behind the ear, allowing the pressure from the grip of the headset bracket to the sides of the head evenly. From there you will not feel the pressure in the front more than the rear, using for a long time without causing fatigue.

The cushion is thick and has perfect softness

Whether your ear is small or big, you never have to worry about Tiamat 7.1 V2 because the storage space is very large. Thanks to this space, the soundproof design will not cause too much air pressure on the eardrum causing tinnitus when used. In addition, although with a fixed head frame, the ear cushions are still quite a comfortable length to serve all sizes ear of the gamer.

The volume is just right

For a headset with up to 10 real speakers on either side along with an aluminum frame that is heavier than a plastic frame, everyone would think the Tiamat 7.1 V2 would be very heavy. In fact, the weight is quite moderate because one part has many plastic details, one part is firmly attached to the head thanks to the force of clamping, and earcups and ear cushions are a very optimal combination.

SOUND

Quite disappointing when in Stereo mode, the Razer Tiamat 7.1 V2 gives a lack of detail, bass encroaches quite a lot in the mid-range and general detail in mid is quite poor like the way the 2013 V1 version could show. Assuming we play an FPS game in this Stereo mode, the footsteps will be overwhelmed by the bass and show signs of sagging but not floating so we can hear them clearly. When the mid-range loses its detail, listening to music will be quite difficult if you don’t want to say it straight: the Razer Tiamat 7.1 V2 sounds pretty bad!

With 7.1 real surround sound, treble is pushed up quite a lot, and the bass band almost does not appear. In this mode, it can be said that the quality is quite bad for listening to music, watching movies, but if it is dedicated to the FPS game line, it is outstanding quality.

The difference between virtual 7.1 surround sound and real 7.1 surround sound is too far away. When we experience virtual surround sound, the sound reproduction is in a large space for the sound position is not correct, or is not clear. Most virtual 7.1 types always give quite faint ambient sound, gamers will find it difficult to identify the enemy footstep when listening in this mode. Even with a good Stereo gaming headset like the HyperX Cloud Revolver when connected to the Sennheiser GSX1000 Gaming Amplifier (one of the factors for the best 7.1 virtual quality in the gaming world) it is difficult to pinpoint the exact sound source.

On the contrary, for the Razer Tiamat 7.1 V2, what is superior to other Stereo gaming headsets is that the distance from the sound source emits is quite accurate.

SUMMARY

Advantages

– Replaced by an aluminum frame compared to the first version, the clamping force is just right enough to hold on the head without causing too much pressure.

Well-elastic soft ear cushions, supporting, and perfect clamping force for a comfortable long-term use experience, while keeping high sound insulation.

– Convenient rotating ear cups create comfort, do not put pressure on the front of the ear like the fixed design.

Conveniently integrated control panel, which can adjust the volume individually for each subwoofer.

– High aesthetic speaker chamber, LED backlight creates an outstanding shape for the subwoofer for a modern appearance, recognizing the Razer brand in a unique way.

– Weight is not really light, but thanks to the advantages of support above, gamers will not feel tired when used for a long time.

– Because it is real surround sound, capturing the sound position is quite accurate, serving very well for FPS games.

Defect

– The sound quality is still poor after years of development, as bad as the way the original version of Tiamat 7.1 showed. Can play games well but can hardly listen to music.

– Optimally usable only with devices that support 7.1 Analog.

– The mica lid on the ear canal is easy to scratch if you do not pay attention to use.

– The price is too high


Pamer
[collapse]
razer tiamat 7 1 v2 – analog / digital gaming headset analog/digital surround sound true black 2 chroma for pc review dual subwoofers
Exit mobile version