amazon TOTOLINK N200RE reviews
Competitive pricing, high speed, strong waves, and dedicated IPTV-enabled VLANs make it easy to set up and configure the router’s built-in TOTOLINK N200RE wireless access point router.
Basically, the TOTOLINK N200RE is an integrated wireless access point (AP) router, which is responsible for sharing Internet connections (from WAN ports) to 4 LAN ports and real mobile devices. Now connect wirelessly to this device via Wi-Fi.
However, according to the specification announced by the manufacturer, the TOTOLINK N200RE is also capable of playing the Repeater role to amplify the waves of another available Wi-Fi network.
The Test Lab found that compact size was the first attraction in this product, but what might make the test team “suprise” is the breakout of the TOTOLINK manufacturer when flexibly designing a cover. A form of “forced” heat dissipation for N200RE.
Of course, on both sides and the bottom of the cover of the device, TOTOLINK still arranged a lot of holes / holes to help heat the convection of air inside and outside is always guaranteed.
Last but not least, the 5dBi gain antennas are not removable, but allow for flexible rotation, which makes it easier for users to place the N200RE on the table, cabinet, shelf or hanging directly on the wall.
Performance and intelligence
Designed for use in small offices or apartments, the TOTOLINK N200RE offers 4 LAN ports (10 / 100Mbps) capable of automatically identifying straight or cross-over LAN cables; This is accompanied by the ability to broadcast 802.11 b / g / n Wi-Fi with maximum data transfer rate of up to 300Mbps.
N200RE has high Wi-Fi broadcasting capacity (at 100mW) and fast theoretical transfer rate, which is an effective choice for access and sharing problems. Internet connection with equipment investment budget of less than 20 USD.
Also according to the manufacturer, TOTOLINK N200RE supports common Wi-Fi network security features such as WEP, WPA2 and WPA-mixed.
Test Lab found that TOTOLINK maker has been making its mark on popular customers, at least for those who have never deployed Wi-Fi for office or home network, with ease configuration is unexpected.
Specifically, after a few minutes of reference installation guide, Test Lab successfully connected TOTOLINK N200RE to the fiber optic cable network, as well as Cisco branded router that provides Internet access.
The Test Lab found that just plug in the power jack, connect the LAN cable between the WAN port on the N200RE with any LAN port on the modem or router to the Internet, turn on the power switch and wait for a second. Wireless access (simply called Wi-Fi network) leads directly to the Internet called TOTOLINK_N200RE.
However, by default, this Wi-Fi network is not password-protected, so anyone can log in to access the Internet, and to be fair, this is an unlikely exception on TOTOLINK N200RE if The user has not been able to reconfigure the device.
However, Test Lab is really convinced by the N200RE’s “instantaneous” capability, as well as the default manufacturer assigning an IP address of 192.168.1.1 and opening the DCHP feature to the device for easy access. Easily log into the configuration interface from PC.
Test logging into the TOTOLINK N200RE configuration interface from a personal computer via LAN cable and even Wi-Fi connection smoothly.
Remarkably, in some situations, when detecting the IP address 192.168.1.1 is identical to the IP address of the Internet-powered device (modem, router or AP), Test Lab realizes that the N2100RE will actively at the new IP address is 192.168.0.1.
It can be said that this intelligence of TOTOLINK N200RE has helped administrators as well as carefree users to “let go of worry” about IP address duplication which can cause many problems related to connection in An intranet within the home or office. In fact, to control a strange device attached to a local network (wired or wireless) is quite difficult and more than ever, not everyone is aware of the principles of IP addressing installing and installing a new network device.
With N200RE, the TOTOLINK vendor implements the “unified” interface and from this interface page, the user can quickly change the IP address for the N200RE, set up WAN parameters, configure the server level Broadcast IP address, IPTV virtual private network.
where can you get a TOTOLINK N200RE online
Totolink N200RE – 300M Wireless 802.11n/b/g Broadband Router: Buy it now
Easy to install
TOTOLINK N200RE provides three modes of operation: Gateway, Repeater Brigde and Repeater WIPS, in which the default mode is Gateway.
Note that if you switch N200RE to active Wi-Fi amplifier then you need to note that the Brigde Repeater option will take the router’s IP address layer forward in order for the N200RE and all connected devices to This TOTOLINK router. Meanwhile, the WISP Repeater option as well as Gateway will take the LAN address layer of the N200RE to the devices connected to.
In other words, the Repeater Brigde option will create connections with an IP address along with an Internet traffic source (not N200RE).
At Wireless, you can set a password to protect your Wi-Fi network, create a new SSID, set bandwidth limits for each SSID, schedule Wi-Fi broadcasts, configure WPS secure connection .
For example, to add a new SSID, in the main console, select Wireless and click on Multiple SSID.
At the interface that appears, select the Enable drop-down menu in the Multiple SSD. Immediately, N200RE will create a new SSID and call it TOTOLINK_N200RE VAP1. By default, this SSID is not password protected. However, you can easily rename the SSID and reset Wi-Fi security.
And if you want to “squeeze” the bandwidth for this secondary Wi-Fi network, you enter the top speed values for TX and RX.
Testing at Test Lab shows that the bandwidth control on the TOTOLINK N200RE works efficiently and accurately.
In addition to the basic features of a router such as Firewall and QoS, Test Lab recognizes that TOTOLINK N200RE also offers advanced administration options such as DDoS attack protection, DDNS configuration, device restart scheduling, and Indispensable is the ability to back up and restore the installed configuration.
Back in the TOTOLINK N200RE Repeater, the team found that essentially configuring this feature was a lot like using the TOTOLINK N9.
The implementation is quite simple. Also from the main interface, scroll to Wireless, and open the Wireless Repeater feature. First, you click on the drop-down menu at the top and select Repeater Bridge or Repeater WISP.
Then, go back to the Wireless section and open the Wireless Repeater feature.
At the interface that appears in the right pane, click on the drop down menu labeled Wireless Repeater and select Repeater Bridge or Repeater WISP. Then, click the Site Survey button to discover available Wi-Fi sources.
When a list of wireless access points is listed, you click on the source to be amplified, then the information of the Wi-Fi source is immediately synchronized to the interface. Next, you need to enter the Wi-Fi login password (if any), and finally click the Apply button to complete the installation process.
