The smart robot vacuum cleaner is a smart home appliance that can effectively clean every corner of the house, can both vacuum up dirt and dry stains without you having to spend a lot of time & effort like before.
For “it” to work properly, you should regularly clean it once every 1-2 weeks.
Instructions on how to properly clean the robot vacuum cleaner
If the robot vacuum cleaner is slow, loud, and doesn’t clean effectively, chances are you forgot to clean them regularly.
Especially right after using it, you should also check if the brush edge, the machine’s wheel, is entangled with tangled hair, pet hair? If there is a need to handle it immediately to make the machine operate more smoothly.
Normally, if the garbage does not stick or the dust container is not full, you can periodically clean the vacuum cleaner about 1-2 times a week.
- Clean the edge brush
Although the robot vacuum cleaner is smart, clean, it becomes useless if fur or tangled hair gets stuck on the edge brush.
Not only slows down the rotation speed but also causes the engine to heat up, hindering the cleaning process of the machine.
After you have removed the tangled hair from the brush immediately after finishing work, for effective cleaning, you should remove the entire brush for easier cleaning.
For robot vacuums that use a broom nut, you can use the tool to remove it for cleaning! After cleaning, you rely on the letter L-R printed on the brush to reattach it to the right position left-right.
- Clean the middle brush
The middle brush is located below the machine, so it often gets entangled with hair, but it is not as easy to disassemble as the edge brush. It would help if you used scissors or a blade to cut the hair in each twist on the brush’s body. Then use your hands to remove the hair.
Next, clean the roller with a damp cloth, especially the corner area. After cleaning, put the brush back in the correct position.
- Clean the dust box of the robot vacuum cleaner
The dust box and the vacuum port are the places to store a lot of garbage and dirt from large to small.
It would help if you cleaned this area of the robot vacuum to remove odors and residues that may affect the machine’s ability to work.
How to do: You remove the garbage box, empty the garbage and dirt and then rinse it with clean water. You leave the dust container in a dry place until it dries, then reinstall it on the robot.
- Clean the sensor of the robot vacuum cleaner
The robot vacuum’s sensor helps to recognize the direction, map, and avoid collisions with objects in the room. That makes cleaning faster and more efficient.
The sensor part of the robot vacuum cleaner is usually located at the front or bottom of the machine. So in a short time of use, this part is very dirty, you should also clean it.
How to do: First, find the sensor’s location by reading the manual that came with the device.
To safely clean the sensor, you should only use a soft, dry cloth to wipe the sensor surface of the device gently. Never use a wet cloth to clean the sensor, as it may cause internal damage.
- Check the wheel
How do you need to check the inner shaft when detecting the robot vacuum cleaner moving in a strange, slower trajectory? You need to remove the wheel of the machine.
Check the inside and remove any debris or dirt on the wheel hub. Then clean the wheel thoroughly. Finally, put them back in the machine.
- Filter mesh maintenance
The filter is one of the important parts of the robot vacuum cleaner, helping to remove bacteria and fine dust in the air.
Therefore, after more than one week of operation, you need to clean and maintain the filter. First, remove the filter and use a soft brush to brush the dust out gently.
If this part is soaked in water or rubbed vigorously, it will be damaged immediately. Therefore, you should only use a damp cloth (which is wrung dry) to wipe away stubborn stains on the filter gently. Let the filter dry, then reinstall it in the machine.
However, you also need to replace the filter mesh every six months because they have been heavily soiled and have no use for cleaning.
- Clean the mopping system
With some robot vacuum cleaner lines, you also need to clean the mopping system regularly for the machine to work at its best.
Remember, each water tank should be continuously changed with new water to avoid contaminating the whole house.
After use, you remove the water tank, empty the water, wipe clean. The towels need to be washed and dried. Then put it all in place.
- Use it properly
Normally, robot vacuum cleaners can only clean dirt, tiny garbage like debris on the floor.
If soy sauce, spilled milk, or “unclean” things are on the floor like vomit or pet feces, it’s a good idea to clean it up yourself (rather than using a machine). Because it is not clean, it also causes dirt to “stretch” all over the house.
Suppose you find that the robot inadvertently cleans up this dirt. Then you should remove the trash tray, brush, wheel, and any removable parts to clean and clean carefully.
Usually, in these cases, cleaning the robot vacuum cleaner is very difficult and laborious. You shouldn’t let this happen!
Some notes when cleaning and maintaining the robot vacuum cleaner
When cleaning and maintaining the robot vacuum cleaner, you need to note a few things as follows:
When cleaning the robot vacuum cleaner, you should wear protective gloves and a mask to ensure safety. In addition, you should also clean the robot in a well-ventilated place, away from living areas, to ensure that dirt and bacteria do not affect your living space.
Do not use detergents to clean the robot vacuum cleaner; it is best to use clean water. If used, choose non-corrosive cleaners for electronics.
When cleaning the robot vacuum cleaner, you should only remove and clean each part, not all at once. To avoid the case of not remembering the installation position, which part is removed first, removed later.
All accessories need to be dry, not “stuck,” to avoid affecting the engine and the system in the machine. After that, check by running a test to see if the robot is stable or not.
If you want to disinfect, you should use a cloth soaked in a small amount of isopropyl alcohol and clean it carefully not to damage the material on the surface of the machine.
Hope the above sharing helps you in the process of cleaning and maintaining your smart robot vacuum cleaner.
This cleaning job is relatively simple and quick if you are proficient and apply it daily. I appreciate your interest in following the article!
how to maintain clean where keep your roomba use pure app and mop amazon auto shark dock light flashing exclamation point max automatic troubleshooting battery replacement brushes brand reviews base cleaner black bissell smartclean button red bumper carpet smart company charger cleaner-white cheap directions deep from dog poop reset a what is the best self cleaning error codes easy easiest filter xiaomi multiple floors samsung home can hair often sensor instructions india 2000 ionvac manual ion sweeping robot intelligent vacuum that in straight lines jcpenney keeps saying why does my stopping ls23 mini pucrc26b pucrc25 not working on price of plus really know when stop should you with parts review tzumi call stairs specific room ultra which vs v2 cleans wet won't walmart jet bot+ station remote control iq with/ wash roborock – 7687 tge tesvor out narwal brush roomba® i7+ rooms corners wifi self-empty xl self-clean eufy ilife mi i pyle pucrc95 rechargeable steam tidybot usb uv 1200pa power won’t spot mijia pro ariete x-clean 2718 3-in-1 floor stair mama sweep sanitizing robotic