amazon InFocus IN112A reviews
InFocus IN112a is one of the projector models for the educational environment of its IN110a Series. General features of this product line is the design of high brightness, support both 2D and 3D content and attractive presentation.
In terms of appearance, the InFocus IN112a has a completely different design than the InFocus IN110 Series, which is intended for corporate customers. The most noticeable difference between the two main product lines is the InFocus IN112a which features a thick body design with large openings on the left / right sides. Meanwhile, the products of the IN110 Series such as InFocus IN112, InFocus IN114, InFocus IN116 usually focus only the large heat sink on the front of the machine and push the heat from the inside of the machine forward.
Compared with the cooler design of these models, the InFocus IN112a is a little more disadvantage because the heat from the inside of the machine can affect the speaker at close range. However, the InFocus IN112a deserves a plus in design from the Test Lab – because the rear leg has been improved (a customizable tripod) that saves a lot of time. This DLP projector is also equipped with a compatible submerged cradle system that is well suited for suspended ceiling fittings whenever needed.
While in the soft segment, the InFocus IN112a is still equipped with all necessary video interfaces such as VGA, HDMI in parallel with S-Video and Composite Video. The product is also equipped with two 3.5mm audio inputs and 2W speakers. In addition to its slideshows, video (up to 1080 / 60p source resolutions), the InFocus IN112a can also play 3D content from a Blu-ray player or compatible PC using the included software. Compatible with the DLP Link (120Hz or 144Hz frequency). According to the company, the InFocus IN112a bulb not only has high brightness (3,000 ANSI lumens) but also has a life expectancy of up to 10,000 hours in Eco Blanking mode, 6,000 hours in Eco Mode, Or 5,000 hours of normal use.
Despite its wide range of specifications and features, the InFocus IN112a supports only SVGA (800 x 600 pixels) resolutions to minimize costs for consumers. However, if there is a higher demand for sharpness, users will still have other options with same brightness but higher resolution such as InFocus IN114a (1024 x 768pixel) or InFocus IN116a (1280 x 720pixel) However, initial investment costs will vary by product.
where can you get a InFocus IN112A online
InFocus IN112a SVGA 3D Ready DLP Projector: Buy it now
Presentation quality
In order to be able to best judge the product’s quality, the Test Lab connects the InFocus IN112a to the Dell Studio 1555 laptop, which is often used through HDMI and reheats the device within 30 minutes. Although it supports a brightness of up to 3,000 ANSI Lumens, Test Lab still decides to test the machine’s playback capabilities in low light conditions and minimize the secondary light that powers the screen.
Due to the integration lens has a large distance factor of 1.9 to 2.2, so to get a large frame width of 1.3 wide, Test Lab must put the screen a distance of nearly 2.4m . With its default settings for brightness, contrast, and preset modes, the InFocus IN112a features a naturally hot color frame with good color depth. White color reproduced quite naturally, although black is not as dark as expected. Throughout the testing process with office tests such as text slides, tables, graphics, the InFocus IN112a delivers decent results. The default display characters on chrome browser web pages can be seen from 1.5m to 2m. However, due to the limited resolution, the large letters (over 10.5 points) still can not avoid the slight aliasing phenomenon when observing.
As mentioned above, the InFocus IN112a gives color images that are slightly warmer and slightly lighter. However, in the advanced control menu, users can still customize some color quality decisions like Gamma or Color temp. In addition, the machine also pre-set the display mode for each slide as well as the specific screen color. However, these presets are generally less effective than the default presentation slide option. With Gamma customization, Test Lab recognizes four preset modes – CRT, Video, Film and Bright – which are more effective when used in conjunction with the color temperature option. For example, the hot colors in the video Madagascar 3 are somewhat “hot” if you set the color temperature to Cool and gamma selection in Film mode.
Also with the initial setup, the Test Lab test show only in conditions that use only light sources from neon lights (about 3 meters away from the screen), the results are still very good due to the frame brightness. Continuing to experiment in more light sources, the 1.3m frame brightness is noticeably reduced, but color images are generally acceptable. The only color affected much are just black in most tests.
As a result of this test, the InFocus IN112a is able to meet the needs of presenting in the classroom with multiple light sources as well as small and medium meeting rooms.
