TOTOLINK EX200

amazon TOTOLINK EX200 reviews

The TOTOLINK EX200 is a Wi-Fi Extender that makes Test Lab the most distressing part of its testing process.
The TOTOLINK EX200 and its TOTOLINK EX300 brother, which had been tested long ago, extend Wi-Fi coverage like the DAP-1620 DAP-D20 series of products, DAP -1520 DMG-112A.

However, the practical experience at Test Lab shows that to bring convenience and ease in the configuration phase, it is clear that the TOTOLINK manufacturer has sacrificed quite a lot of features of the product.

Or, in other words, if you are looking for a Wi-Fi Extender with the “easy install” criteria, TOTOLINK EX200 is the first choice.

Beautiful appearance

Like the TOTOLINK EX300, the EX200 is still designed as a plug directly into the household electrical outlet, but if you look closely at the design, the EX200 is smaller and more compact.
Notably, the EX200 has no power button layout. Instead, the device will immediately “battle” when pinned to the power source. Meanwhile, the WPS button is bold TOTOLINK set right “facade” of the device is quite large to bring convenience to the user, accompanied by two lights (power and connection strength Wi-Fi between the EX200 and the transmitter) is integrated directly into the WPS button.

Suppose you have ever used some other Wi-Fi Extender products. In that case, you will probably find that the power on/off button on this type of device is redundant because no user or administrator is back. Public “light off, dimensional opening” wireless wave amplifier.

TOTOLINK EX200 has two 4dBi gain antennas at the side of the device, which can rotate (180o / 90o), but unfortunately, you can not disassemble them. The Lab Test found that although the rotation of the antenna was not perfect, it still worked well when the Test Lab was installed in difficult locations such as the ceiling, stairwell, or the floor.

To ensure that the device is always “cool” when operating 24/7, TOTOLINK actively designs countless heatsinks along its sides, and Test Lab appreciates this design.
On the underside of the device, the TOTOLINK EX200 is equipped with a 100Mbps LAN port (RJ-45 connector) and a hard reset button. With this LAN port, the TOTOLINK EX200 allows you to connect to an external device that needs an Internet connection or a link to your local network. The original Wi-Fi wave that the EX200 transitions / amplify will be “branched” into a wired network in more detail. Of course, you can connect this network to another router or switch to increase the number of network connections for the area to deploy.

If you have ever used the EX300, it is not difficult to see that, in all technical documentation, TOTOLINK did not mention the permission to use a PC directly connected to the EX200 via the network cable to perform the configuration steps this device.

where can you get a TOTOLINK EX200 online

TOTOLINK EX200-300Mbps Wireless N Range Extender With American Plug: Buy it now

TOTOLINK EX200-300Mbps Wireless N Range Extender With WPS One-Click Setting: Buy it now

Easy configure

TOTOLINK EX200’s configuration information is printed on the specified product container, which supports 802.11b / g / n Wi-Fi connectivity, allowing data transfer rates up to 300Mbps (network wireless).

Test Lab found that the biggest advantage of TOTOLINK EX200 is that it supports fast configuration with a secure WPS connection mechanism.
Specifically, in the available Wi-Fi network coverage, you only need to first enter the WPS button on your modem or router to route to the Internet, press and hold the WPS button on the EX200 for 2-3 seconds. The device is automatically paired with the original Wi-Fi source. When the WPS on the EX200 stops blinking and turns to green (or yellow), that means the setup was successful. At this point, the parameters of the original Wi-Fi network were automatically applied to the EX200.

To be clear, the SSID created by the TOTOLINK EX200 will be identical to the SSID of the original router/modem, and the login password is the same.
When the WPS lamp is red, you are completely safe because the EX200 is connected to the transmitter, but the signal strength is poor. Meanwhile, the green signal indicates that the Wi-Fi signal is good, while the yellow signal is normal.

The Lab test found that even with this installation method, even universal users – who did not even install and configure network devices – could still deploy their own homes, apartments, or offices themselves. Myself. If you read the accompanying documentation carefully, Test Lab claims that you only need about 10 minutes to complete everything to TOTOLINK EX200 have to wave.

The only downside is that if you are unfamiliar with the network, then after the EX200 “combine” with the Wi-Fi source, and when you want to go to the device configuration page will lead to a “blind” IP address corresponds to EX200. Of course, you can still “get” IP addresses with some specialized tools with little knowledge of network/system administration.

Handier for mobile

In addition to connecting via the “one-touch” protocol to the WPS button, TOTOLINK EX200 also allows users to log into the device control panel quickly to perform the settings manually.

However, what’s commendable here is that the TOTOLINK EX200 has “forgotten” the trouble of having to remember the IP address or the default URL of the control homepage, or even in many cases, have to detect the IP address / This URL manually.

Instead, as soon as the smartphone (Android or iOS) logs into the default SSID of the EX200, a pop-up window will immediately export, and that is the device driver home page. From this interface, you follow the guided steps.

However, as the Test Lab said at the beginning of the article, the TOTOLINK EX200 is merely a Wi-Fi signal amplifier, which does not allow for setting up advanced configurations like the EX300 or D-Link.
Test Lab said that the wave strength of TOTOLINK EX200 is strong and stable, especially in the test environment, there are 4-5 wireless access points in operation.

TOTOLINK EX200 is an option that you should think of first of all when there is a need to extend Wi-Fi for your home or office, especially if you do not have the knowledge and experience to install the network.