Energizer 10.000 mAh

amazon Energizer 10.000 mAh reviews

This is a 10.000 mAh battery with Energizer’s Quick Charge 3.0. Energizer is well-known for its AA batteries, AAA batteries, and many accessories such as chargers, extra batteries, USB and memory cards. This 10,000 mAh battery is enough for a day, with fast charging, two outlets, average charge of about 3 times for a phone.

Design

Appearance of the 10,000 mAh Energizer is relatively large, long as the Apple iPhone 7 Plus, weighs a fortune (240 grams), plastic shell but a bit slippery. Compared to the 10,000 mAh Anker, the unit of the Energizer 10,000 was almost twice as long. The quality of the case is quite good because the joints on the battery body are not completely flat, the grafts are not straight, touch up can feel its roughness.

Especially on the battery is a microUSB cable (10cm) plugged into the output port 1 and there are places to clamp so you do not need to carry other microUSB cable. One of these fibers is suitable for recharging the battery and can be recharged to another machine is quite convenient. Of course if you use the iPhone or USB-C, this fiber is considered to lose 1/3 effect.

The actual charge

I use a fully charged 100mL Energizer for Apple iPhone 7 (1.960mAh), charging for the Samsung Galaxy S8 (3,000mAh) once, then back charging for iPhone 7 (after the battery is drained), the Energizer unit Charging time is 30%. Summing up, the 10,000mh Energizer battery after a full charge could charge the mix for the iPhone 7 more than twice and charge the Galaxy S8 once:

Galaxy S8 (3,000 mAh): fully charged.

iPhone 7 (1.960 mAh): fully charged + 30% more.

Charge time and charging speed

Battery Energizer has two charging ports, port 1 (Quick Charge 3.0) that charges faster than port 2. Specifically:

– Output 1: 5V 3.1A

– Output 2: 5V 3A – 9V 2A – 12V 1.5A

Charge 1: iPhone 7 (1.960 mAh), port 1, charging from 17% to 100% takes 1 hour and 56 minutes.

Second charging: iPhone 7 (1.960 mAh), port 2, charging from 4% to 100% takes 2 hours 40 minutes.

Charge 3: Galaxy S8 (3,000 mAh, Quick Charge 2.0), port 1, charging from 0% to 100% takes 1 hour 30 minutes.

Charge 4: LG G6 (3.300 mAh, Quick Charge 3.0), port 1, charging from 0% to 100% takes 2 hours.

where can you get a Energizer 10.000 mAh online

Energizer 10.000mAh Portable PowerBank / Charger for any Smartphone, included microUSB cable with 1 USB port for iPhone’s, Samsung’s and more: Buy it now

Energizer UE10008 Power Bank Portable Charger 10000mAh Capcity for Smartphone Tablet iPhone iPad Samsung Galaxy Sony LG: Buy it now

Associated technologies and certifications

Quick Charge 3.0: This is the most interesting, the fastest charger for those that support Quick Charge 3.0 such as HTC U11, LG G6, LG V20, BlackBerry KEYone … It is also backward compatible. With Quick Charge 2.0 or 1.0, you can still charge fast for these machines, but of course not as fast as those with Quick Charge 3.0.

There are a lot of safety and fire-proof certificates in the battery. If you list them all, it will be as long as this: CE, FCC, ETL, CB, EAC, RoHS, Reach, ERP6, DOE6.

Overload protection certificates are easier to understand. The 10.000 mAh battery has self-protection to prevent overloading, over voltage, short circuit, power off, temperature control and also Auto Voltage Sensing technology to distribute the current to suit each type of appliance. They are different, like Anker’s Power IQ technology. Actually during the charging process for many devices, the Energizer 10,000 mAh battery is relatively cool, with no excessive heat or abnormal heat.

In addition, the use of Li-Po battery core will also help safe battery, less likely to burst than the Li-Ion battery core.

In general, the 10.000 mAh Energizer battery meets many essential requirements, including fast charging, sufficient capacity, multiple safety standards, line protection technologies, current regulators, Li-Po cores, (2 years). What I do not like is the size of the battery and heavy.

---

sạc dự xp10002cq