amazon HPE ProLiant DL60 Gen9 reviews
HPE ProLiant DL60 Gen9 is an input-level server that focuses on light physical server load. Mechanical design is very good. It can be managed using an iLO4 standard management interface.
HPE ProLiant DL60 Gen9 test configuration
The configuration in this review is the basic configuration of HPE DL60 Gen9.
Chassis: 4 x 3.5 “LFF 1U HPE DL60 Gen9
CPU: 1x E5-2603 V3 or 1x E5-2630L V3
RAM: 1x 4GB DDR4-2133 ECC
SSD: Intel DC S3700 400GB
RAID card: HPE SmartArray B140i
Operating system: Ubuntu 16.04.2 LTS, Ubuntu 14.04.5 LTS, CentOS 7.3, Windows Server 2016
Overview of HPE ProLiant DL60 Gen9
HPE DL60 Gen9 is a cost-effective 1U server. There are 4 3.5 “drives ahead. You won’t find advanced features like NVMe SSD hot-swap on this platform. Perhaps HPE is aimed at low-cost users.
Inside the chassis, we found a custom motherboard layout. There are two CPU sockets, one of which is in our test system. Each CPU has 4 DIMM slots or a DIMM for each channel. The platform itself may have up to three DIMMs per channel. HPE saved a few cents in production by not adding DDR4 DIMM slots.
Similarly, you may find that you can mount up to three additional cards outside the PCIe attached using the amplifiers at the back of the system. In our test system, only one of these has been attached. The test configuration, only one CPU, is assembled with only three fan clusters. This reduces costs as well as lower power consumption on low spec machines.
Despite the fact that this is intended as a low-cost platform, HPE still uses many of the familiar ProLiant Gen9 features. For example, HPE ProLiant DL60 Gen9 uses HPE’s unique latch mechanism.
The benefit of such socket design is that it makes replacing and upgrading simple with a lower chance. A minus point is that this socket is only compatible with HPE branded cooling solutions and HPE partners. Most markets use a standard standard heat sink design for Intel Xeon product lines E5-2600 series (V1 to V4). If you were a customer of other server manufacturers before and hoped to recycle spare parts with HP, that would not work. HPE has a lot of techniques even in mechanical design, but you have to play in their ecosystem.
In terms of rear I / O, HPE ProLiant DL60 Gen 9 has PCIe routers to add additional devices such as network controllers. The exact configuration is configured at the time of ordering.
Dual 1GbE NICs displayed as Intel i350 NICs are high quality NICs that are widely used and supported in the software industry.
Besides network ports, HPE also has a USB 3.0 port on the back as well as a VGA port. These devices are often used with external KVM devices such as data center trolleys.
PSU is a common power 550W. There is no redundant power plan on the DL60 G9 server. In many low-cost data centers, where DL60 is targeted, there is only one power feed. Use a single PSU, increase reliability and reduce energy consumption.
Our testing unit illustrates what might be the available configuration of Rackmount HPE Proliant. The market for such a machine is usually distributed applications and IT administrators prefer to run on specialized hardware such as domain and network services.
where can you get a HPE ProLiant DL60 Gen9 online
HPE ProLiant DL60 Gen9 management iLO4
Perhaps the biggest plus for the HPE ProLiant DL60 Gen9 is not hardware, it’s the iLO4 management software. HPE has a test management interface on each machine.
There are common features such as the ability to incorporate authentication into larger directory services, power-powered machines, and iKVM functionality.
The main feature here is that the basic iKVM console will not allow booting into the operating system without an upgrade license. This is similar to vendors like Dell and Lenovo but different from others like QCT and Supermicro offer fewer features but include them in the purchase price of the server.
The key to iLO management is being able to manage a large number of machines with supported control aircraft and automation frameworks. Basically with HPE ProLiant DL60, HPE has one of the lowest cost servers that can be manufactured by iLO. This allows HPE customers to deploy low-cost, low-performance physical servers and still manage them in wider ILO ecosystems.
In terms of performance, Intel Xeon E3-2603 V3 is the lowest option available. With that, the server starts around 4 Intel Xeon D four core performance and scales up from there. The main thing is that DL60 Gen9 can only handle up to 105W TDP CPU.
Use single exchange PSU, no redundancy, no heat, energy saving consumption. We measure our power consumption on Schneider Electric / APC PDUs for machines when not in use, using typical 60% CPU load and heavy computing application (GROMACS)
As you can see, HPE did a great job of pushing energy consumption down to the level of the Intel Xeon E3 product line. It is a feat of HPE.
Although the HPE ProLiant DL60 Gen9 is marketed as an SMB server, the real value in the removed platform is in technical management and iLO4. With prices, iLO is a high-end target from SMB stores that need only a few servers. Similarly, the trend in light applications is to store them in the cloud or on virtualization infrastructure. However, many IT administrators prefer physical machines for certain applications where HPE ProLiant DL60 Gen9 may be suitable.
This must be a reasonable choice for businesses that need to use high-performance servers but low power consumption.
Every product prepare launcher and provide on release date will be unboxing and check to bring full specifications & details features, service manual even suggest choose accessories. Thank for visting and sharing !