amazon Corsair Vengeance 12GB reviews
Corsair is a well-known brand in the market high-end RAM. With product lines Vengeance, Corsair is now offering a high-performance DDR3 RAM for hardware enthusiasts.
Information from the manufacturer
- Classification: PC3-12800
- The pulse rate: 1600
- Storage: 12GB Kit (3 x 4GB)
- Latency: 9-9-9-24
- Voltage: 1.5 V
Corsair memory modules are packaged very nice. On the box is a picture of three consecutive bars transplant ram on a motherboard and big words 12GB. Behind the line advertising box and three windows of the enclosed parameters RAM. In the lower right corner of the box model number. Each bar is packed separately for each plastic trays and containers fit in a cardboard box, so they can easily be removed for not being clamped.
The first impression was of mild memory modules. RAM seemed to be very heavy use of aluminum for radiators but actually very thin plates and are arranged very solid. The heat sink metal gray aluminum, while the white sticker is pasted on the other side. A closer look at the white sticker on the RAM, it holds all the necessary information about everything: speed, latency and voltage …
Vengeance overall look, the design of Corsair is shown clearly. The first boundary vertices and edges are bent on. There is a piece of very solid radiator clamps holding the two pieces are located above RAM. If you look carefully the heatsink is not fully exposed to the RAM.
where can you get a Corsair Vengeance 12GB online
Operation and overclocking
Corsair Vengeance overclocking is a work pretty smoothly. Easy system boot at CL9 1600MHz and 1.5 V without any problems. Even at this memory voltage can reach bus 1820 MHz. Next step is to slowly raise the voltage to 2.0 V to see if this can help drive higher performance level. However all three memory modules for increased performance without any increase of voltage. Although the index was only bus increase 220 MHz (it seems not much), but this figure is quite respectable for a 12 GB.
At regular timings 9-10-9-27, the system worked perfectly at 2000 MHz and again regardless of voltage are included. 2040 MHz level parameters are most important work we can achieve with this product. At low latency, while trying to boot the system at CL5-5-5-15 result is “impossible”. When raised to CL6, the system runs stable at starting in 1066 Mhz. At 1333MHz, the computer does not appear to be met. Although we have tried to increase the voltage with a very small increase, the memory can only reach a maximum speed of 1232 Mhz.
At CL7-7-7-21 at 1.5 V may have been pushed to 1428 MHz speeds. Only when using larger voltage resulting new RAM speeds of 1436 MHz. At this point, everything has been stable operation. .
Last but not least, the memory was launched at CL8-8-8-24 and systems directly to 1600 MHz achieved. Used to test the system boots immediately and worked perfectly at the moment. And once again, the increase in voltage leads to a change also increase the memory up to 1640 MHz.