The ASUS GL753VE is a heavy-duty gaming laptop with a very high processing capacity. The laptop is favored by both gamers and other professionals. However, like all appliances, the battery will lose its efficiency in time. Hence, the laptop may very well require a battery replacement to regain efficiency and further extend the lifespan. This detailed review will discuss the whole process and related considerations and tips for replacing the battery of the ASUS GL753VE, from identification of symptoms of battery troubles to the replacement steps and suggestions.
1. Knowing the Battery in ASUS GL753VE
1.1 Battery Specifications
ASUS GL753VE in general comes with a hybrid lithium-ion battery. As we know, lithium-ion batteries have a high energy density and hence have longer life spans-the common choice for laptop batteries. The battery specifications for this laptop also vary, commonly indicating:
Type: Lithium-ion (Li-ion)
Capacity: 6-cell, 48Wh to 72Wh depending on configuration
Voltage: 14.8V to 15.4 V
Typical Lifespan: Usually from 1 to 3 years, depending upon usage and care.
1.2 Common Battery Issues
Battery issues can arise as the battery ages. Some of the most common ones are:
Short Battery Life: The amount of time the battery lasts on a full charge decreases.
Slow Charging: Takes longer to charge or does not fully charge.
Heating: Battery overheating either when in use or while charging.
Swollen Battery: A safety hazard that causes physical swelling of the battery.
Shutdowns: The laptop shuts down suddenly without warning due to insufficient power.
Identifying these symptoms is extremely critical for diagnosing whether a battery replacement is needed.
2. Getting Ready to Replace the Battery
2.1. Tools and Materials
Make sure you have got all the tools and materials you will need before actually starting the replacement:
Replacement Battery: A genuine battery or, if not possible, a high-quality third-party battery that’s compatible with at least the ASUS GL753VE.
Screwdrivers: Generally, a Phillips head screwdriver is required to take apart the laptop.
Plastic Pry Tools: To pry open the laptop safely without damaging the casing.
Anti-static Wrist Strap: To ensure static electricity doesn’t damage any internal components.
Soft Cloth or Mat: To put on so that screws and parts can be kept systematically.
2.2. Backup Data
Backing up data before replacing the battery is always a good practice. The battery replacement process, by all means, should not affect your data in any way, but in case of unexpected problems, your data will definitely be assured.
2.3. Restaurant: Power Down and Disconnect
Make sure the laptop is fully powered off and unplugged from any power source. Remove any external devices such as USB drives, an external hard drive, and so on.
3. Step Battery Replacement Procedure
3.1. Laptop Disassembly
3.1.1. Removing the Back Cover
Turn it Over: Set the laptop down on a soft surface with the back facing up.
Unscrew Back Panel: Remove all the screws holding the back panel in place using the Phillips screwdriver. Place the screws in a safe location as the same will be required to put the laptop back together.
Pry Open the Panel: Insert the plastic pry tool under the back panel and gently pry it open. Avoid applying excessive force on the plastic clips holding the panel.
3.1.2. Locate Battery
Identify battery: Now that the back panel has been removed, locate the battery. Usually the battery is a rectangular box-type component with a few wires connecting it with the motherboard.
Disconnect Battery: Carefully unplug the battery cable from the motherboard. This connection is usually a small-plug type connector so just gently pull it out.
3.2. Removing The Old Battery
Unfasten the Battery: It is most likely held down by screws. Use the Phillips-head screwdriver to loosen and remove them.
Remove the Battery: Carefully lift the battery from its compartment. Be gentle to avoid damaging any components around it.
3.3. Installing The New Battery
Position the New Battery: Place the battery into the compartment and align it with the screw holes.
Secure the Battery: Screw the battery in place.
Reconnect the Battery: Reconnect the battery cable to the motherboard, along with any other connections from the battery.
3.4. Laptop Reassembly
Replacement of Back Panel: Align the back panel with the laptop and press it down firmly so that all the clips are engaged properly.
Screw in the Panel: Insert the screws to secure the back panel.
Reconnect Power and Switch On: The power cord goes back in, and the laptop gets switched on.
4. Things to Do After Replacing
4.1. Battery Calibration
Once the new battery is installed, it is better to calibrate it to facilitate accurate battery level readings:
Charge to Full: Charge it to a 100% level and leave it charging for three or four hours.
Discharge Fully: Use the laptop until it discharges fully and the laptop shuts down.
Recharge Again: Charge to a 100% level one more time afterward. Doing so completes the calibration process.
4.2. Checking Battery Health
Keep Track: Check for battery performance by using the laptop normally and seeing if there’s any improvement in battery life and charging times.
Run Diagnostics: Diagnose any battery issues using built-it or third-party diagnostics to check its health and performance.
5. Battery Life Tips
5.1. Maintenance Tips
Clean Vents: Cleaning the laptop cooling vents so that there is no dust or debris to tarnish the air circulation is helpful in preventing overheating, which in turn can compromise battery life.
Update Software: Update your operating system and drivers so that your battery performs at optimum levels.
5.2. Optimal Usage Practices
Adjust Brightness: Lessen the brightness of the screen to preserve battery life.
Battery Saver Mode: Use battery saver mode of your OS to reduce battery consumption.
Application Management: Close all unwanted applications and processes draining battery.
5.3. What to Avoid: Extreme Situations
Temperature: Do not expose the laptop to extreme temperatures, either hot or cold, as these will deteriorate battery performance and life.
Storage: Should you plan not to use the laptop for a long time, keep it in a cool and dry place, charged halfway up 50%.
6. Troubleshooting Common Issues
6.1. Battery Not Getting Charged!
Check Connections: Ensure the battery is well-connected to the motherboard and that the power adapter is working correctly.
Check Adapter: Try and test the adapter and the cable for any damages or malfunctions.
Update the BIOS: In some cases, updating the BIOS will sort charging issues; check ASUS support website for possible updates.
6.2. Battery Draining Quickly
Power Settings: Check all power settings and change them to better suit the battery life.
Application Usage: Keep an eye on applications draining more power than they should.
6.3 Battery Not Recognized
Pre-check Installation: Ensure the battery is properly installed and connected.
Reset CMOS: Sometimes resetting the CMOS (Complementary Metal-Oxide-Semiconductor) will solve the problem of detection. Refer to your laptop manual to find instructions for resetting the CMOS.
7. Right Replacement Battery
7.1. OEM Vs. Third-Party Battery
OEM (Original Equipment Manufacturer): OEM batteries are produced by ASUS or authorized partners and are usually considered more reliable. They are made for your specific laptop model and come with a warranty period.
Third-Party Batteries: A good third-party battery can work out to be a less expensive alternative, although it is pertinent to purchase from trustworthy sources: Check for reviews and confirm compatibility with your ASUS GL753VE.
7.2. Considerations
Capacity: Choose a battery with similar or higher capacity relative to the original one to make sure it is adequate in supplying power.
Compatibility: Check for compatibility of the replacement battery to your specific ASUS GL753VE model.
Warranty: Go for a warranty to cover your battery in case of defects or any possible issues.
8. Conclusion
The Battery Replacement for ASUS GL753VE can be Friday-Wednesday to replace the battery and further renovation of the laptop. Battery specifications of the laptop should be known beforehand. Adequate preparation is essential for battery replacement, and following the instructions of the entire process will ensure the replacement of the battery. Maintenance, along with proper use and care of the new battery, will go a long way toward keeping the laptop in good condition.
Summary of Key Points:
Battery Problems: These include decreased battery life, slow charging, and heat.
Replacement: The laptop is disassembled, an old battery is removed, a new battery is installed, and the laptop is reassembled.
Battery life: Calibration and monitoring of battery health are critical after replacement.
Maintaining Battery Life: Do periodic maintenance checks, use correctly, and avoid extreme conditions.
Battery Selection: Choose a genuine or certified high-quality third-party battery with suitable capacity and compatibility.
Following these instructions and best practices will ensure the smoothest of battery replacement experiences and will allow you to enjoy the continued performance of your ASUS GL753VE.