amazon D-link DHP-307AV reviews
The D-Link DHP-307AV includes two identical devices, white, compact size (100x70x34mm) to help you make the most of your existing network infrastructure.
On each device there is a 10 / 100Mbps LAN port, the reset button and the default encrypted password configuration (just hold the key). The encryption standard of the device is AES 128bit.
Establishing a simple connection, a plug-in device, a network cable (from this device) connects to the Internet router, the other device plugs into another home electrical outlet, and the network cable connects to the computer. Use the network. The above picture is only illustrative of the principle of operation of the product, the actual use of the two electric drives may be far apart.
Included are Quick Start Guide, warranty information book and disk containing configuration software as well as detailed documentation.
Through the practical use of electrical systems at Test Lab, the device works well, easy to use but not high speed.
When you press Security, the device will be configured with the manufacturer’s default encrypted password. The devices can “communicate” with each other but not secure so it is only suitable for home use. To set up your own encryption, you will need to use the included utility on the CD. Through testing, this utility is very easy to use, simple interface with two main cards: card 1 allows to rename device, update firmware, reset to the default configuration. Note, if you configure the device directly attached to the computer does not matter, but if you configure another device does not plug directly into the computer, then enter the password (printed on the device).
Card 2 to configure cryptographic encryption, enter password when configuring for remote device.
On the CD, you can also find a very detailed, brief, intuitive, and easy to understand documentation.
In terms of speed, Test Lab plugs two devices at two sockets about 8 meters apart (plugged directly into the wall socket, two sockets are within the control of a total CP), the measured speed result is only At a moderate level (uploads of 15.15Mbps and download of 14.96Mbs), enough to share basic data as well as Internet access but not enough to meet the needs of video sharing or large files. The upload / download (shared socket) is tested under ideal conditions of plugging both devices to the same outlet, resulting in up to 80Mbps upload / download speeds. This indicates that the system can deliver higher transmission speeds depending on the quality of the wiring in your home / office.
where can you get a D-link DHP-307AV online
D-Link Powerline AV Network Adapter Kit (DHP-307AV): Buy it now
Test Lab also tried two sets of plugs in two different CP sockets (each with its own CP controller), so the two devices could not see each other. At home / office before investing equipment, especially if you want to share in multi-storey buildings, if all is managed by a total CP then no problem but each floor a separate CP you should see Consider another solution, such as Wi-Fi.
The D-Link DHP-307AV consists of two compact devices (100x70x34mm) that help you take advantage of the existing power line infrastructure to transmit network signals without the need for wires. office. On each device there is a 10 / 100Mbps LAN port, the reset button and the default encrypted password configuration (just hold the key). The coding standard of the device is 128-bit AES.
The deployment method is simple, you just plug one of the two devices into a power outlet, the network cable connects to the Internet router, the rest plugs into another home electrical outlet and the network cable connects to the computer that needs networking. For home use, simply press the Security button on two devices that you can use without doing anything else. For businesses, you should use the software on the accompanying CD to reconfigure encrypted passwords to be more secure, avoiding the bad guys “eavesdropping” information on the link. Through testing, this utility is very easy to use, with a simple interface with features such as renaming the device, resetting the manufacturer defaults, updating the firmware, configuring encrypted cryptography. Note that if you configure the device directly connected to the computer, it does not matter, but if you configure another device not directly plugged into the computer, you must enter the password (printed on the device). On the CD, you can also find a very detailed, brief, easy-to-understand documentation section.