amazon ASRock B150M-Pro4 reviews
The motherboard is packaged in a small, neat, in the spirit of saving that ASRock.
However, the savings in quality of the parts are still important to them, as shown by the Super Alloy standard which is repeated outside the box.
Extremely basic accessories, including manuals, driver disks, two 6 Gb / s SATA3 cables, and main block.
For those who are familiar with the motherboard, the B150M-Pro4 / D3 is extremely fancy: the shortened length of the M-ATX standard, but the fullsize ATX width. So B150M-Pro4 / D3 face-to-face looks fat, but it compensates for increased hardness, no fear of curl when 24-pin power supply plugs.
Low-performance, low-cost, the B150M-Pro4 / D3 is a fairly conventional design, but it still has a hot spot for the mosfet and copper chipset. In addition, black is also a favorite color for consumers, giving a strong feeling.
Designed for both Core i5 and Core i7, the motherboard is equipped with up to 6 power phases – too much for the 65W TDP generation of i5, i7 Skylake.
Each power phase is controlled by 3 low-impedance mosfets (B85M-Pro4 only 2), each with slightly lower load, lower operating temperature.
However, the company is careful to equip the mosfet for 4 main power phases.
The Cmos battery is not located below the regular PCIe x16 slot, which jumps to the 8 pin CPU, much easier to remove.
As shown on the name, the B150M-Pro4 / D3 supports DDR3 memory instead of DDR4 as most other Skylake motherboards, which help users upgrade can not use the old RAM, because DDR4 is still high now.
If one of the most prominent features of the B150 chipset is the ability to support the CrossFire 2 AMD graphics card better than the B85, the second PCIe x16 slot has been upgraded to 3.0, doubling the 2.0 specification. This factor makes the ability to encroach on the advanced configuration of the B150 stronger.
In addition, the B150M-Pro4 / D3 still has the presence of a conventional PCI slot – in contrast to the trend for this slot to be removed from new generation motherboards. I personally think that this common PCI slot is still important because many people are still using older sound cards and wifi cards.
The chipset radiator, however, is not beautiful, but it focuses on heat dissipation, which cuts the groove well to increase the area of air contact.
Four out of the six SATA ports are rotated horizontally, so the SATA wires can be a bit tighter. All 6 ports are standard SATA3 6 Gb / s, now users do not need to distinguish when plugging SSD anymore.
The gateway area is also appealing with all three of the basic DVI, Dsub and HDMI ports, making use of the three-screen output of the Skylake CPUs – a great value for the job.
Main holds both PS / 2 ports for the mouse and the old standard keyboard.
Six USB ports are located side by side, including four standard high-speed 3.0 ports.
The audio section is also featured, equipped with ELNA dedicated audio capacitors. The sound chip is Realtek ALC892, which supports 7.1 audio for Gaming Headsets and Speakers.
Configure the test
Motherboard: ASRock B150M-Pro4 / D3
Processor: Intel Core i5-6600K
Memory: 1 x 4 GB Kingston HyperX T1 1866 MHz
Graphics Card: Gigabyte GTX 950 Xtreme Gaming
Hard Drive: Kingston HyperX 240 GB SSD
Source: 650W
In this test, we patched the ASRock B150M-Pro4 / D3 with a Core i5 processor, 4 GB of RAM and a GTX 950 graphics card – the equivalent of B85’s most recent build. This is also a recommended configuration for the B150 motherboard to maximize the amount of money spent.
where can you get a ASRock B150M-Pro4 online
ASRock Motherboard Micro ATX DDR4 B150M PRO4: Buy it now
Bundle: ASRock B150M PRO4 + Core i5 6400 (4 x GHz) + 32GB DDR4 2133MHz Memory: Buy it now
Bundle: ASRock B150M PRO4 + Core i5 6400 (4 x GHz) + 16GB DDR4 2133MHz Memory: Buy it now
Bundle: ASRock B150M PRO4 + Core i5 6400 (4 x GHz) + 8GB DDR4 2133MHz Memory: Buy it now
Bundle: ASRock B150M PRO4 + Core i5 6400 (4 x GHz) + 4GB DDR4 2133MHz Memory: Buy it now
Conclude
ASRock B150M-Pro4 / D3 is a typical product that has all the advantages of the B85 series. The price is reasonable, full features, good components and meet all needs. In addition, Intel has added a few more value features: Full SATA3 6 Gb / s, 3 monitor output, support for 2 VGA faster.
The use of DDR3 RAM is both the advantage and disadvantage of the B150M-Pro4 / D3. The advantage is that users upgrade to re-use the RAM of the old machine when DDR4 prices are still high. But users who love new technology will not be happy with this.
With a price of $95, the ASRock B150M-Pro4 / D3 is the brightest motherboard for users who need strong performance but want to save money. For those who do not have enough money to invest once, pairing the B150M-Pro4 / D3 with a Pentium or Core i3 processor for upgrades is also not a bad solution.
Pros:
– 6 SATA3 6 GB / s.
– 4 SATA ports turn horizontally, helping to wires neatly.
– Cmos batteries are easy to operate.
– Standard width ATX makes the mains stronger, eliminates the risk of fracture when attached to the power supply and the 24 pin.
– 6 phase power dissipation Core i7.
– There is mosfet radiator.
– Still USB 2.0 port, users still install Windows 7.
– Secondary PCIe x16 slot upgraded to 3.0, secure CrossFire 2 AMD card.
– Run DDR3 RAM, conveniently upgrade from the old configuration.
– There are 3 DVI, Dsub, HDMI output ports -> export 3 screens simultaneously.
– There are usually PCI ports for older devices.
– Good price.
Cons:
– No clock boost for Core i5 and Core i7.
– Does not support DDR4 RAM.